Iím excited to share this DIY project. I transformed an old dresser and nightstand to new and you wonít believe the before and after pictures or how easy it was to do. First, to keep you interested, here are the after picsÖ
My parents have had these pieces since I was kid. Sure back in the 80's they were in good shape, but the years have taken a toll on them and it was definitely time for an update and a little personality. My secret to this effortlessness project was spray paint! That's right. I worked the same process on both pieces, so I'll only go through the step by step on the nightstand (because I didn't take enough pictures of the dresser) and at the end of this post you'll get the big reveal. Oh wait, I already posted it above. Okay, well you'll get the before and after pics to compare. How 'boat that?
1. Krylon Chalkboard Spray Paint (2 cans @ $8.79 each)
2. Krylon Looking Glass Mirror-Like Spray Paint (3 cans @ $10.29 each)
3. Valspar Clear Protector (1 quart @ $7.19)
4. Wooster Brush Ultra/Pro Sable Angle Paintbrush ($14.42)
5. A bunch of mismatched Hobby Lobby glass cabinet knobs (17 knobs; ~$40)
6. Elmer's Wood Filler ($5.95)
7. 220 Grit Sandpaper ($5.50)
Now, I already had the wood filler, brush, and sandpaper, so my total cost to restore this bedroom set to new was a mere $95.64! Less than $100! Woo hoo! I LOVE a bargain. But I also love quality and while I have to admit that $14 for a paint brush may seem a little pricey, it was well worth it. I bought a cheap brush for a prior project and I was constantly picking broken bristles off my painted surface, plus it left the ugliest brush marks. I ended up sanding off the entire newly paint surface, buying this Wooster brush and re-doing the whole @#!$%!! thing. In comparison to that old brush, this baby is a dream.
So, moving on, here are my really fugly blank canvases:
And the makeover beginsÖStep 1:
First, make sure youíre working in a well ventilated space. I did my work in my private studio that my parents refer to as their front yard and patio. Once youíve got a comfortable work space, remove all hardware, fill holes with wood filler and sand down the filled holes till smooth. As you can see I already did that on the dresser.Step 2:
Spray paint goes on really thin so any imperfections or scratches on wood will really stand out after painting, so sand anything you donít want to see.Step 3:
Remove drawers and apply a thin layer of chalkboard paint to the drawer faces and the body of the furniture. Now, youíre probably wondering why I used chalkboard paint instead of regular primer. It was sort of an experiment. I read that chalkboard paint sticks to anything so it makes a pretty good primer. But the real selling point for me is that thereís no need to sand the surface. Confession: I HATE SANDING. Iíll admit, I did sand a few scratches on the top surfaces, along with the wood filler surface. But I have no problem taking a shortcut if it means I get to skip the sanding. And whoever said chalk board paint makes a good primer hit it right on the nose. Iím sold.
Oh, and hereís my spray painting lesson learned: Itís really easy to get pooling and drips on your surface. To avoid this make sure to hold the can at least a foot away from the surface and keep the can moving in sweeping motions so the coats go on thin without drips. I did two coats of the chalkboard paint before trying not to screw up the real finish.Step 4:
Krylon Looking Glass paint. What is it you ask? Another experiment of mine. This paint is recommended for use on glass surfaces to create a mirrored finish. I was going for something like this:
Well, it didnít quite work out that way. But still, I really like the finish I got. Itís sort of a gun metal looking finish.
While spraying, I went heavier in some areas and lighter in others giving the finish an uneven look where some of the black comes through on some areas, while other parts are very silvery. The heavier painted areas are accomplished with more layers rather than thicker paint because as I mentioned in step 3, the paint will pool and drip if you donít keep the layers thin. The cans are only 6 ounces, so I used a total of three cans for the two pieces of furniture.Step 5:
Sealing your surfaces. Youíll want to seal your painted surfaces to protect from chipping, water damage, etc. I used Valspar Protective Finish. Itís water based and goes on milky, but dries clear. I used two coats of the finisher. To avoid brush marks: 1) as I mentioned earlier, definitely use a good quality brush, and 2) Lightly sand between coats. Yes, I hate sanding, but this wasnít too bad since it was such a quick light job. The theory here is that there are peaks and valleys of the substrate left on the surface after painting with a brush. Sanding gets rid of the peaks and the next layer fills in the valleys so you end up with a smooth surface. Sounds reasonable, huh? 3) Keep the layers thin. 4) And finally, after youíve started to put down a layer, DO NOT run your brush back over. Once the paint/finisher starts to dry if you run your brush back over it youíll end up with some clumpy sticky looking stuff. So just a quick coat and let it dry. If youíre worried about brush lines, just wait to sand instead of trying to smooth with your brush.
And one last thing on the sealerÖ While I liked the smoothness and the final finish of the Valspar product, it really bugged me that even after letting the dressers sit outside for a few days after the final coat, I could still smell the product almost two weeks after bringing the pieces back into the house. The plus side though for Valspar is that itís only $7, more than half the price of their Minwax Polycrylic competitor. But Minwax does claim to have ďlittle odorĒ so Iím thinking that next time this sensitive schnoz will dish out the $17 for a quart of it.Step 6:
Hardware! This is the super fun part. Shopping! I found the most awesome glass knobs at Hobby Lobby. And what gets even better is that about once or twice a month their knobs go on sale for 50% off. Score! And you know what that meansÖ Iím actually saving money by going shopping! I needed 17 knobs and the regular prices at Hobby Lobby range from $3 to $5 per knob. But with the 50% discount I got all 17 knobs for about $40. Score. Score. I mismatched the knobs for more of a shabby chic kind of look. Check out some of the perdy knobs, all installed and gorgeous looking. What can I say, I like shiny things.
And now, big reveal. Okay the second big revealÖ.
Let's compare the before and aftersÖ
There you have it. For tons more do it yourself ideas, inspirations, and how-to's, visit my blog or follow me on facebook
(site addresses in signature line). New DIY projects posted EVERY DAY.
And THANKS SO MUCH FOR STOPPING BY!!