What does Craftster mean to me? Innovation - Inspiration - Information
I love that the Craftster community is filled with innovative people. Folks who come up with neat new ideas, or interesting ways to revisit past ideas. I find this, as well as everyone's colour and materials choices quite inspiring! I also love the fact that so many Craftsters are happy to share how
they made what they made.
Such an awesome place, over all, I think!
For the Craftster 10th Anniversary Challenge, I decided to try and address these three ideas into one project, and I came up with this blanket:
First a close-up: IMG3868
, on Flickr
And here's the full shot:IMG3835
, on Flickr
This project started as "I'm going to make a bunch of granny squares using my scraps and then decide what to do with them after", with the initial thought of just adding any missing rounds with a new colour... but then I wondered, do they have
to be the same size to join them together easily?
Apparently not!Granny square pattern:R1:
ch3 2dc in 3rd ch from hook, (ch2, 3dc in the same ch as before) three times, ch1, join to top of ch3 with a sc.R2:
ch3 2dc into sp below the ch3, (3dc, ch2, 3dc in the next ch sp) three times, in next ch sp, 3dc, ch1, join to top of ch3 with a sc.R3-end:
ch3 2dc into sp below the ch3, 3dc in every side space, (3dc, ch2, 3dc) in the three other corners, finish the round with 3dc, ch1, join to top of the ch3 with a sc in the first corner.
On the last round, replace "ch1, join to top of the ch3 with a sc in the first corner" with "ch2, join to top of the ch3 with a slst in the first corner".
I would do as many rounds as I could complete with the yarn I was using, or stopped at 7 rounds, whatever came first.
When I had a huge stack of them, I decided to come up with a layout that would work, and then fill in any blanks from there. This is the layout I used:Super-Scrap-01
, on Flickr
(click to see the full size)
In this picture, the number above the column indicates how many of those squares you need. The number inside the first block of the column indicates how many rounds those squares have.
For this layout you need: 96 one round squares, 64 two round squares, 48 three round squares, 16 five round squares, and 12 seven round squares.
All that's left is to join them!
The joining method I've been using for granny squares for a while is this one: https://www.craftster.org/forum/index.php?topic=348031.0#axzz2bI9opXSZ
But it makes for a LOT of ends to weave in for this type of blanket, so I decided to use a variant - the motions are pretty much the same, however, the order in which you work into the sides of the squares changes, so you can work continuously - basically, you don't have to cut the yarn, so you only have twice as many ends as balls of joining yarn you use (rather than twice as many ends as squares you have to join together)
This tutorial will work for the standard square layout (a simple grid of equally-sized squares), as well as for a layout like this one where each column has squares all of the same sizes (but each column has a different size than the others).Continuous Join-As-You-Go Tutorial
The first thing you need to do is decide on a layout for your squares. Here is a layout of 6 squares with a schematic for a general overview of what we'll be doing:
Take the square from the top right corner and crochet around three sides:
Take the square that goes *below* that corner square and put it next to the square you were just working with. Work 3dc into the corner of the second square:
Now rotate that second square up and join it along that side to the first square:
Crochet around two more sides of this second square:
Continue adding squares down the column by repeating how you added the second square.
The last square of the column is slightly different! Only crochet along one more edge after the joining edge:
Take the first square at the bottom of the second column and put it next to the last square of the first column. 3dc into the corner:
Rotate the new square so that you can join that edge to the previous square. When you get to the corner of the square you're working on, work 3dc in the corner, ch1, slip stitch to the adjacent space, or in this case since they line up, around the join of the adjacent two squares:
ch1, then take the next square up in the second column and start joining it to the previous column:
Do this with all of the squares in the second column so that you end up with something like this:
It's time to finish the edging on the second column now, which will work almost exactly the same way as the first column.
Go all the way around the first square. When you reach the spot where four squares meet, ch1, join to the square directly across from the one you're edging with a slst in the corner space, ch1, then start edging/joining the next square.
Continue in this manner until all of your squares are joined.
All that will be left is to work across the bottom and up the right side of the blanket.
There are a few ways to do this to get it to look "normal". I tried a few of them before settling on "3dc in the corner of the first square, ch1, sc between the edging on the two squares, ch1, 3dc in the corner of the next square":
I like to work a second round of edging (as each of the internal squares looks like it has two rounds of edging), and when I get to the bottom and right edge, I work a group of 3dc into the sc.
Here is the blanket before the extra outside border:
Here it is with an extra round:
The difference is subtle, but I like it. ^_^
Because I am an avid blanket crocheter, and it currently takes me three large loads to wash all of the handmade blankets we own, both of the blankets shown in this post (the rainbow one that is my challenge entry, and the variegated one shown in the tutorial) have been donated to Blankets For Canada.
Oh, and I'm already working on a way to use this joining method with a bunch of squares that are different sizes that aren't laid out in neat, one-size-each columns. So far I've discovered that it is absolutely possible, and I'm just playing with layouts now.
And this all came about because of Craftster.