A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Cookie Policy | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Join us for fun, contests and discussions on Craftster's Facebook page!
Total Members: 315,078
Currently Running With Scissors:
162 Guests and 3 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop
  Show Posts
Pages: 1 ... 8 9 [10]
91  CRAFTING FOR GOOD AND NOT EVIL / Crafty Charitable/Social Causes / My Little Pony Flying Piggy Custom for Charity on: August 13, 2006 05:59:27 PM
Hi guys! I'm auctioning off another pony for Doctors Without Borders. Please check it out!

This one was really fun to do because I got to dremmel off it's face. I'm discovering that the process of making these is kinda creepy during the half way state. Those watery eyes looking up at me....Heebie Jeebie!

I had to smooth out it's mane holes and found a good product called Model Putty to deal with the job. It's more of a slip than a putty and is used mostly for miniatures. It dries very fast, but you can sand down rough spots afterwards.

Also, I learned that painting acrylic over strait airbrush will remove your airbrush work and leave nasty spots that look alot like skin peeling off which then balls up into your wet acrylics leaving lumps all over the place.


92  MISCELLANEOUS TOPICS / Discussion and Questions / Looking for Crafty Magic Melt glue sticks on: July 08, 2006 07:29:53 PM
I have a regular sized Crafty Magic Melt gun and recently ran out of glue. I've gone into every store in town and looked all over the internet for more glue sticks but haven't had any luck. Does anyone know where to find these?
93  JEWELRY AND TRINKETS / Trinkets and Jewelry: Completed Projects: General / Button fruit earrings Super Easy! Super Cute! on: December 07, 2005 10:36:36 PM

Leaf beads
Orange buttons
Metal rings from necklace clasps
Orange seed beads
Silver french earring hooks
Pieces of wire bent to have eyes on each end

Using different colored buttons can make any fruit you love! I was thinking of using smaller buttons and doubling the earring to make cherries.
94  Halloween / Halloween Decor and Parties / Re: Monster Wreath *Now with tutorial* on: November 07, 2005 12:01:27 AM
I made a couple of these for some friends. Thank you so much! It is such a charming idea. Smiley

I glued felt teeth inside the hole to make it more bitey and also attached bells for some festive jingling action.
95  MISCELLANEOUS TOPICS / Completed Projects / Re: the easiest (and cheapest!) way to make stickers! on: October 25, 2005 10:25:13 PM
This isn't nearly as thrifty but this is how I make durable stickers:

Buy some sticker paper for your printer.
Print out whatever you want on it.
Laminate your print with self adhering laminate and cut out.
You can get both of those things at Office Max.

Smiley I like your idea better, but thought the laminate bit might be useful.
96  MISCELLANEOUS TOPICS / Completed Projects / Re: light up fish hat- my first post here on Craftster on: October 25, 2005 10:18:04 PM
Oh man askaboutrpickles, now I have to make one of those!
That'd be freakin' adorable. ^_^
97  MISCELLANEOUS TOPICS / Completed Projects / Re: light up fish hat- my first post here on Craftster on: October 24, 2005 11:10:08 AM
Thanks everybody! It's really encouraging to have so much positive feedback. Cheesy

Let me know if you have any questions I didn't go over. More than happy to share!
98  MISCELLANEOUS TOPICS / Completed Projects / Re: light up fish hat- my first post here on Craftster on: October 23, 2005 04:25:30 AM
Good idea for the teeth! I'll check that out. Okay, I'll try to post an in use pic soon. ^_^

Uhm, well, I guess it just sort of popped into mind. I've already been dinsoaur monsters and princesses and stuff for Halloween, so I needed a new topic. Deep sea fish are nifty, plus it gave me an excuse to try making something that lights up. I wish I could have gotten the eyes to light up too.

Oh and one more thing, I also brushed tissue paper inside the hat to keep the wires down.
99  MISCELLANEOUS TOPICS / Completed Projects / Re: light up fish hat- my first post here on Craftster on: October 23, 2005 04:02:56 AM
I wish I'd taken more step by step images, but I didn't think of doing a tutorial until afterwards. Oops!

Oh, also, I had wanted to add teeth and still might. My idea for that is to get some soft foam, like uphostery foam, or even felt possibly, cut it into triangles and hot glue it onto the front. You could also maybe add spikes that way too. A big glob of hot glue makes a really cool base and nice detail for a tooth to rest in. Like gums. Chomp chomp!
100  MISCELLANEOUS TOPICS / Completed Projects / light up fish hat- my first post here on Craftster on: October 23, 2005 03:49:11 AM

Hi there! So this was my fist post here and also my first electric project. It's a light up angler fish helm made out of mostly paper mache.

So, I went to Radioshack and asked how to hook up an led to a battery pack with a light switch. It's easy, but a bit scary at first.

Supplies for light:
Battery holder
a switch
wire stripper
sodering iron
electrical tape


Supplies for the rest of it:
aluminum foil
elmers glue
hot glue
tissue paper
paper clay
glass eyes or perhaps a ping pong ball cut in half
paint brushes
paint (I used acrylics)
small balloon
bendable, but not weak wire

You will want to make the wires connecting the LED to the the battery and switch very long so there is room to go from the fishes lantern to inside the hat. Plan it out ahead, and do what seems comfortable for you. I used about 2.5 feet of length for this. But everyone's head is different and I don't have tons of hair.

Make sure to strip the ends of the wires so there is no plastic for about 1/4 inch. The plastic will burn when you weld it otherwise.

Make sure not to have any batteries in the battery pack while you are working and not until the exposed parts of wire have been wrapped in electrical tape.

Okay so for the light you are making a loop. The loop goes LED to switch to battery pack then back to LED.
Weld a wire to one of the LED prongs. Weld the end of this wire to a prong on your switch. Take a second piece of wire and weld it to the other prong on your switch. The battery pack will probably have two wires coming from it. You can just wrap the end of the wire from the switch around one of the battery pack wires. Take another new piece of wire and wrap it around the other battery pack wire and weld the end of the wire to the LED.
If your switch has more than two prongs and your light isn't lighting, try welding to a different prong.

Wrap all exposed wire in electrical tape.

There are online tutorials all over out there, so make sure to look at lots of reference before dealing with electricity. It's very safe as long as you take caution and educate yourself.

The Hat:

Wrap tinfoil around your scalp to make a form of your head. Use several sheets to get something durable. Tape it or glue it together for extra strength. It'll be pretty fragile until you get some mache dried onto it.

Ball up newspaper and tape or glue it ot the hat to make the form for the fish body.

I tore pieces of newspaper and brushed it onto the outside of the aluminum with thin amounts of elmers glue. Water it down a bit so its slightly runnier than normal glue. Let dry.

I took newspaper and wrapped it around my LEDs wires and taped it together. This is going to be the fish's lamp. You'll bend it a bit later to get the u shape.

Draw out some fin forms. Take your wire and make ribbing that will go inside the fins to support them. Sort of like spikes. I used a piece of tape to keep my row of ribs from moving about. I took the tissue paper and brushed it onto the ribs. This wil make a surprisingly strong and translucent fin. Do this to both sides of the ribs.

Back to the body. It should be dry. Take your dried fins and glue/tape them onto your fish. Brush more tissue paper onto the fins base and onto the body to make the fins attatch firmly. I went back over the ribs once it was dry to add taxture to the fin. It popped the ribs out more and added more strength to the fin.

I hot glued my battery pack and light switch inside of the helmet in a recessed area. Then I taped the wire into the inside of the hat, over the fishes lip, then glued the newspaper wrapped part of the wire to the front of the fish. I bent it into a U shape and brushed on tissue paper to add strength.


Once the hat is dry again I glue my eyes to the fish. Then I make facial features and gills and add a bit of a thicker base to the light thingy with the paper clay. Make sure this dries befor eoyu go further. If it cracks later you can patch it with more paper clay.

Blow the balloon up so it's about an inch big. Mache this with the tissue paper. Once it dries pop the balloon and put it over your LED and mache it onto the light stalk. Don't make the paper too thick or light won't shine through. You can go over later with full strength elmers glue to add strength without losing the lights effect.

Paint this paper bulb a light color like yellow so it looks brighter than the rest of the hat.


If there are any rough edges brush more tissue over them and rifine the sculpture.

I also take hot glue at this point and draw on the fish. I add bumps and skin folds and lots of fun stuff really quickly just with hot glue. It also gives the paint something to pop out detail on.

At this point go to town with paint. I painted the fins yellow, light colors make the fins pretty for light to filter through. I painted the fish black, being careful not to get any on the fins. The I painted color all over the fish. Afterwards I took a sponge and spongedon black. This made my details pop out because bright colors were hidden in the cracks where the sponge couldn't get to. I did put black wherever the ribs in the fins were since you light won't come through those areas anyway.

The hat will be a little heavy, a few lbs, so take caution if you are going to wear it alot.

Pages: 1 ... 8 9 [10]

only results with images
include swap threads
advanced search

Latest Blog Articles
Meatless Monday: Kid Friendly Fruit Snacks
@Home This Weekend: Designated Cutting Boards
Tute Tuesday: Altered Journal Page

Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies

Craftster heartily thanks the following peeps...

Follow Craftster...

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2018, Craftster.org an Internet Brands company.