A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Press | Advertise | Cookie Policy | Terms | Site Map
Welcome, Guest
News from Internet Brands:
Closing the Craftster Community on December 19, 2019.
Read the details here.
Total Members: 323,619
Currently Running With Scissors:
147 Guests and 0 Users
Home Craftster Community Crafting Articles Craft Tutorials Crafting Calendar City Guides
  Show Images
Pages: [1] 2 3
1  VHS Tape Sewing Bed Hack in Sewing Machines: Discussion and Questions by sedrasmom on: August 26, 2017 06:00:22 PM
I was gifted this beautiful sewing machine that's missing the extension bed. Sacrificed a video tape, a pencil, and two pencil top erasers, and along with some duct tape, a machine screw, and JB Weld, I came up with this masterpiece. Voila!

Report to moderator  THIS ROCKS  
2  T-Shirt Shorts - Super Easy - With Tutorial in Clothing: Completed Projects: Reconstructed by sedrasmom on: July 21, 2010 03:02:30 PM

I was eyeing a t-shirt to revamp and before making yet another t-skirt I decided to try to make shorts out of it instead because it gets really hotand muggy here in the summer so even if I wear a skirt I'd wear shorts underneath - no amount of cornstarch between my thighs can keep me from getting uncomfortable in the heat. Sorry if that's TMI.

After consulting Generation T to no avail, I decided to wing it. It was a lot easier than I thought! For the first pair I tried I used a t-shirt that wasn't oversized on me and that pair ended up fitting me too tight that I gifted them to my daughter. For the second try I used a shirt that was more roomy, maybe a size or two big on me.For reference, I'm about a size 16-18 and used a mens XXL t-shirt to make these shorts that fit just right, leaning more towards the snug side than being loose like pajama bottoms.

I decided on a drawstring but you can use elastic instead if you want, or even if you didn't add anything to cinch the waist band I would think they would still fit fine, t-shirt material is easy like that. I took pics as I went so here's my tutorial!

First here is the t-shirt I used, front and back:

Step 1: Cut the bottom hem off in one long piece, making sure that it stays folded over and sewn. Set this aside to use it as the drawstring.

Step 2: Turn the t-shirt inside-out and cut off about 5 or 6 inches high from the bottom. This will later become the waist band. Cut straight across the chest as much as you can (I'm salvaging the neck band intact to use for other projects like if I want to put a black neck band on a white shirt) and cut the sleeves off on the inside of the sleeve seam but a little in, so the curve is deeper. Cut the sides of the shirt apart from the armpit down.

Step 3: Sew the areas that were formerly the sleeve holes closed just around the curve. Stop there. Don't go all the way down to the bottom of the shirt.

Step 4: Use this opportunity to sew the bottom hem of the shorts up. It will be easier to do it now while it's flat than later when the legs are sewn together.

Step 5: Match up the sewn seams where the sleeves used to be, which will now be the front and back center of the shorts. Sew the crotch of the shorts from one bottom end of the leg up to the center point and around to the other side.

Step 6:  Take the 5 or 6 inch tube you cut off the bottom of the shirt and cut it to the same size as the waist of the shorts, plus a little extra for seam allowance. Eventually the waist band will be two ply, folded in over and sewn onto the top of the shorts.

Step 7: The next thing to do will be to make two holes for the drawstring to come out. Mark the center point left-to-right then plan for your holes to be about a half inch from this on either side, just one one half of the the strip vertically - like if your waistband piece is 6 inches tall then the holes will be about 1.5 inches from the unfinished side. I sewed two small buttonholes to finish the edges of the holes. You could also use grommets or just not do any finishing here at all, it would probably be fine because t-shirt fabric won't unravel much.

Step 8: Sew the waist band piece into a long tube, fold it in half with the right side out, and sew the open edges together just so they won't move around on you when you're attaching it to the shorts. If you'd rather pin it in place you could go without sewing it closed, but I prefer to sew with fewer pins so I sew it first to make sure I don't miss any layers.

Step 9: Make sure the holes of the drawstring are facing the right side of the front of the shorts and they're centered and all, and that the back seam of the waist band lines up with the back seam of the shorts, then sew the waist band on.

Step 10: Turn the shorts right-side out and use a bobkin/safety pin/your weapon of choice to feed the drawstring through the holes. Tie little knots in the ends of the drawstring and you're good to go!

Report to moderator  THIS ROCKS  
3  Re: Post your CRAFTY Tattoos! in Bath and Beauty: Completed Projects by sedrasmom on: April 07, 2010 04:37:10 PM
I won a gift certificate for a tattoo and wanted to choose a literary quote or passage, but then I came up with the idea of a typewriter. I wanted something bold but already have small tattoos here and there so I knew I had to plan around them - the lizards above the keyboard are a separate tattoo I got years ago - so I thought this worked out well, and it's fitting because I'm a writer, I do a lot of mail art, and I'm fascinated with typewriters. Love that it encourages open-ended play too, now people touch me on my back a lot.

Report to moderator  THIS ROCKS  
4  Recon. sweater socks - sewn, not knitted ***With Tutorial*** in Clothing: Completed Projects: Reconstructed by sedrasmom on: November 12, 2008 10:15:13 PM

I bought a few thrift store wool/blend sweaters to make reconstructed sweater mittens, then realized I had enough mittens, what I really needed was warm socks! I couldn't find a pattern or tutorial so I came up with my own. Turns out it's super easy, I can whip up a pair of these in about 10 minutes. So since winter's fast approaching, I thought I'd share.

Here's the sweater I'm starting with. This one's 100% wool but you could use pretty much any sweater that's a thin-to-medium thickness with some stretch to it.

Each sweater can yield two pairs of socks for me. I wear size 9 shoes. The sleeves can be used to make one pair, and I cut along the side seams like this to make the other. The strip I cut here is about 3.5 to 4 inches wide and about 13 inches long, but there's a lot of room for variation, these measurements do not have to be exact. The strip I cut is curved at the end opposite the ribbing of the sleeve or bottom of the sweater because this end will become the toe of the sock.

The other part to cut out is a set of two football shapes, about 2.5 to 3 inches at the tallest and almost as wide as the body piece of the sock. I use this part of the sweater to cut these pieces because then there's a bigger piece left in the middle of the sweater that could be used to make other things.

Lay the sock body strips out 2-ply and cut each across just one ply from the unfinished edge to the side seam. I make this cut about 8 inches from the toe. Sometimes with stretchier sweater fabric I later have to cut some off the toe end to make it shorter but it's better that they come out too big rather than too small. In this picture, the toe part of the sock is spread open to show where the cut is. Below that, the piece is folded over still.

Sewing the football shaped piece into the slit you make is what constructs the heal. Then all you have to do is sew the unfinished seams starting at the ribbed edge to make sure they match up, and around the toe side to where the sweater's already sewn together from the pre-existing side seam.

That's all there is to it. Turn it right-side out and try it on!

I'm saving all the scraps to stuff a pillow because for the past few years I've wanted a wool bed pillow but I haven't had the money. My kitty likes the scraps too.

Report to moderator  THIS ROCKS  
5  Coffee Bag Cat Scratching Post in Pet-Related Crafts: Completed Projects by sedrasmom on: November 12, 2008 12:49:46 PM

I wanted to make a scratching post and instead of buying one. Instead of having to buy rope to wrap around it, I opted for burlap. I bought a couple big strong coffee bags for $1 ea. from a coffee house, and using an old round cutting board I had and a piece of wood I got from a bargain bin I came up with this. I sewed the edges of the burlap so they wouldn't fray, then used a staple gun to attach it to the post and base. I added a tassel of scrap fabric to entice the kitties to jump up on it, and put a slanted hole at the top to hold a cat charmer toy I made out of a chopstick and more fabric scraps. I also had enough burlap left to wrap two more planks of wood to make shelves for the kitties to sit on in the window. The two shelves and the scratching post cost me less than $5 to make, and most importantly the kitties are pleased.

Report to moderator  THIS ROCKS  
6  Re: Bento Swap 2 Gallery!! in The Swap Gallery by sedrasmom on: July 06, 2008 02:30:04 PM
Yay! Here's the awesome lot off bento goodies I received from EowynUlysses!

I requested a medium-sized lunch bag and got one that's reversible and matches a furoshiki, a bottle cozy, and a utensils holder to boot! I already took the furoshiki grocery shopping.

The utensils holder came stocked with matching napkins, a pair of chopsticks, a big sturdy re-usable spork, and an "I love Dinosaurs" fork and spoon which I absolutely LOVE. I already had to fight Sedra over ownership of those.

Here's another furoshiki, this one is super-sized so I'm sure I will get a LOT of use out of it. And there's a beautiful wooden fan and a set of extra fancy chopsticks in a special case. The pretty box in the upper left is for the fan.

I also got a set of cookie cutters. I'd had my eye on these exact same ones for a while, for frying eggs in different shapes, but I didn't buy them for myself. I don't think I mentioned this to EowynUlysses, but she was right on the money!

Then there's a wristlet made out of a Chinese take-out themed flannel which my daughter and I are already using for colored pencils. I homeschool her in Greek restaurants and at shopping malls while sucking coffee so this is perfect for taking along with workbooks, etc.

I thought this was an excellent idea. She made me a customized journal just for my bento exploits from a stationery set. This is so fantastic!

Thanks so much for the hard work and the great gifties! It was a pleasure swapping with you!!!

Report to moderator  THIS ROCKS  
7  tote, purse, and wristlet made from jasmine rice sack in Purses, Bags, Wallets: Completed Projects: Reconstructed by sedrasmom on: January 25, 2008 10:14:08 PM

I saw some reusable grocery bags online that were made from bags used to carry rice and other goods in Korea. I had this Dragonfly Jasmine Rice sack for a while, and decided it was time to make something out of it. It was a 25 lb. rice sack made of what seems like woven plastic. It is very crunchy but sturdy. The top of the bag had the dragonfly logo I made the tote from. There was a picture of twin Thai women on the bottom third that I used to make a purse, and still enough left over after making those to also make a wristlet. The tote bag has a cotton strap and clothesline ties, the other two have braided twine straps. Here's a closer view:

Report to moderator  THIS ROCKS  
8  **ADULT** toymaking at work - Kinko's remnant flogger! in Toys, Dolls and Playthings: Completed Projects by sedrasmom on: June 04, 2007 12:29:54 AM

I put the Kinky back in Kinko's!

I was working alone for a while tonight so I didn't get a break until the third shifter came in. I'd already had a snack so I didn't need to eat, and I'd just dealt with crabby deaf people so I felt like I needed to do something to unwind.

We have a sign and banner center and there's a box of remnants of adhesive-backed cut-offs from rolls that go on a machine for making die cut lettering to put onto a sign. It's about the consistency of electrical tape, but not as stretchy. I'd used that stuff to make a wallet before.

Tonight I used it to make a flogger.
Report to moderator  THIS ROCKS  
9  Re: Potty Mouth Sweary Word Swap Round 4 in The Swap Gallery by sedrasmom on: June 03, 2007 02:01:26 PM
Maezen and I were both flaked on so we swapped with each other I got some fucking awesome shit from her!

A reversible cuff:

A flippin' the bird plaque:

Fun four-letter word cubes that say fuck/shit/tits/cunt/piss/puta:

A mirror that will surely boost my self-confidence:

And she threw in a bubble gum tape machine that you can make your own swears on, which my 6-year-old promptly claimed. She punched up some cuss words on it and fed them to me. Like mother, like daughter.

Thanks so much, Emily! You fucking rock!

Report to moderator  THIS ROCKS  
10  Re: Potty Mouth Sweary Word Swap Round 4 in The Swap Gallery by sedrasmom on: May 16, 2007 11:28:43 PM
I guess my partner flaked, but here's the shit I made for her, which I guess I'm keeping since she fucked up. I have friends who said "wish you made this for me" that I'd like to keep this for to give it to them for their birthdays, etc. instead of getting a swap angel package for myself.

1 - Where's my Damn wallet???

2 - Shit Clock (I know that's the word that goes through my head most often when I look at the clock. I painted the wood frame red after taking this picture.)

3 - Dyslexic Flour Sack Towel (How I peripherally mis-read KFC whenever I'm driving past one.)

4 - I needed to make one more thing so I came up with this Bullshit necklace.

Report to moderator  THIS ROCKS  
Pages: [1] 2 3

Crafting Ideas
Crafting How-Tos
Crafting Ideas
Crafting Topics

Latest Blog Articles
Tute Tuesday: Christmas Crack
Meal Prep Monday: Black Eyed Pea and Squash Soup
Craftster Featured Projects - Dedicated to the People Who Made It

Craftster heartily thanks the following peeps...

Follow Craftster...

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Help | About | Press | Advertise | Privacy Policy | Cookie Policy | Terms | Site Map | Do not sell my personal information

Copyright ©2003-2017, Craftster.org, © 2009-2018 MH Sub I, LLC dba Internet Brands