A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Cookie Policy | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Join us for fun, contests and discussions on Craftster's Facebook page!
Total Members: 315,063
Currently Running With Scissors:
233 Guests and 6 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop
  Show Topics
Pages: [1]
1  CROCHET / Crochet: Discussion and Questions / It's August, but... on: August 09, 2007 09:44:51 PM
...the cold weather sneaks up quickly! I know there's a wealth of information and patterns for cold weather crochets (scarves, sweaters, arm/leg warmers, etc), and I was hoping to start a collection of good cold weather resources (your own or other free sources) here to share before our fingers are too frozen to make those house slippers or that jacket. August isn't too soon to start preparing, right?
2  MISCELLANEOUS TOPICS / Discussion and Questions / Fusing question on: July 19, 2007 08:07:34 AM
I saw petchy's post about a fused plastic bag bag and was itching to make a themed one for a friend. Does anyone know how/if it's possible to fuse the bags if you put paper--or, why not, photos or photopaper-- between the layers? If it is possible to do it without mutilating the picture/s on the paper, does anyone know between how many layers I should put the photos to make the picture reasonably visible?
3  MISCELLANEOUS TOPICS / Completed Projects / Fun from Pepsi cans (with tutorial) on: July 18, 2007 07:49:21 PM
Here's to a first project post! Who wouldn't want an aluminum elephant sitting on their desk? I saw this little guy from Can Do Planes and was inspired. Smiley He's not perfect, but it was a quick, fun project. And hey, it was a fun way to recycle.

My little guy:


If you want to make one, here's how I made mine (I winged the whole thing, and I know that's a workable method, too):

What you'll need:
- an aluminum can; soda pop, juice, beer can, whatever. And yes, you only need one
- needle nose pliers
- a pair of scissors; the aluminum cuts surprisingly easy. I used a pair of office scissors, but a pair of straight nail scissors would probably work best
- GLUE. I used some heavy duty do-it-all glue. Super glue would probably work just fine
- a needle large enough to poke a hole that your wire will fit through
- possibly a sharpie to write on the can. Or freestyle cut
- something to hold the pieces together. Crafting wire like some for jewelry would probably be best. I tried paper clips. Unless you are immensely patient, DON'T use these.

1. Puncture the side of the can near the base. Cut around the edge of the can near the bottom. Use the pliers to fold down the sharp edge into the can base, working around the circumference.
2. Draw your creature. Either draw it on a piece of paper for a pattern, making sure that you mind the length of the can, or freestyle cut on the can.
- Note: For the elephant, I only cut slits (rather than cut out the section between his legs) where the legs went up so I could bend the side to be his stomach.
- Note #2: Give his legs (or just back legs) a little more length so you can fold down a bit to glue to the base.
3. Flip your pattern (so you don't have to fold out the can bend) and cut out the second side of your creature.
3. Cut in any features. For my elephant, I cut a slit for the mouth.
4. Find a part of the can unused and cut out a rectangle that will fit into the base to hold up your critter. Mine fit that it didn't need any glue, but I had to trim it.
5. Create ears and tail (and whatever else). My tail was a thin strip and the ears were vague rounded triangles with the V cut in and then folded in half.
Bring your pieces together. Fold up the underbelly and glue the two flaps. Pinch together the trunk, poke holes in a few places and insert the wiring to hold it together. Poke holes for the ears and put those in, too. Then, at the top, thread wiring to connect the two sides with some room in between.
6. Cut out a piece for the top of the elephant. It will need to taper along the shape of your elephant. Free hand is probably best.
7. Glue/wire down all missing pieces, and you're set!

That's probably far more ridiculously detailed than necessary, but I hope that helps your aluminum animal endeavors. Phew! And it's a lot easier than it looks to bend and cut the aluminum, so just have fun with it! Cheesy I'd love to see if anyone creates any other fun creatures.

Pages: [1]

only results with images
include swap threads
advanced search

Latest Blog Articles
@Home This Weekend: Designated Cutting Boards
Tute Tuesday: Altered Journal Page
Magic and Luck

Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies

Craftster heartily thanks the following peeps...

Follow Craftster...

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2018, Craftster.org an Internet Brands company.