A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Cookie Policy | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: You can organize your bookmarks into folders!  Read more here.
Total Members: 313,355
Currently Running With Scissors:
385 Guests and 9 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop
  Show Posts
Pages: 1 ... 26 27 [28] 29 30 ... 45
271  ORGANIZED CRAFT SWAPS / The Swap Gallery / Re: Ongoing ATC Swap - June 2012 - GALLERY! on: July 12, 2012 05:26:27 PM
I got mail today!!  Jillybeans sent me a lovely package of papers and of course the famous carrot card.  I love the papers the red one is my favorite from the Happily Ever After stack.  But I don't recognise the blue card, could you tell me what stack it's from?

Also a beautiful card made with stamps and a penguin.  The penguin is stamped over a book page about Shakespeare.  A great choice because I used to collect stamps and who doesn't love penguins.  It is very complex and I see something new every time I look.  Did you use a sponge on the edges to create the pink?  Very cool card!

Thank you so much for the package!

272  NEEDLEWORK / Needlework: Completed Projects / Re: Stumpwork Dragonfly Pincushion finished on: July 12, 2012 04:41:52 PM
Thank you for your comment.  It is sparkly because it is stitched over organza fabric amid I used fine silver thread and a silver plated bead.  But I may try some of the iridescent fibers sometime. 

Thanks for looking.
273  Archive of Past Craftster Challenge Entries / CHALLENGE 76 ENTRIES / Re: Papermaking in the sun on: July 12, 2012 11:48:45 AM
That is wonderful!  Thanks for looking.
274  NEEDLEWORK / Needlework: Completed Projects / Re: Stumpwork Dragonfly Pincushion finished on: July 12, 2012 09:25:56 AM
Thank you so much!  I really appreciate that.  I don't think that a lot of people realise the scale I'm working at.  That dragonfly is 1 inch by 3/4 inch finished.  That makes the wings less then 1/2 inch in length and the width 1/4 inch.  Right now I'm working on a stumpwork butterfly that is much smaller.  One ply of floss is to thick for the wing size.  I'm thinking of getting some fine silk sewing thread or dying my own.  Here is what my first try looked like.

The pincushion won a first at the Fair
Thanks for looking.

275  JEWELRY AND TRINKETS / Trinkets and Jewelry: Completed Projects: General / Re: Dragons Blood Stone Necklace on: July 11, 2012 07:37:06 PM
Thank you for the information, I still think companies make up names for jasper all the time.
The dragonblood necklace took third place.  Usually they have some pretty pieces at the fair but this year I didn't see one piece of jewelry that inspired me.  To bad because I look forward to seeing what others in the area have worked on during the year.  One nice thing was a demonstration of silk painting.  That is one hobby that I haven't tried. 
276  Archive of Past Craftster Challenge Entries / CHALLENGE 76 ENTRIES / Re: Papermaking in the sun on: July 11, 2012 03:53:28 PM
Thanks everyone.  It makes it worth showing details to know it may inspire someone else to try their own paper experiments.  And yes my boyfriend is very clever and is supportive of all the crazy things I do.  But he gets even, he made us meatballs the other day with a secret ingredient, cream cheese.  So it balances things out and the meatballs were great.

I looked at the paper casting I had left outside overnight.  It looked like an animal had poked their nose into a couple of the paper hearts.  We sometimes get possums, so if you see one with a red paper nose let me know.
277  Archive of Past Craftster Challenge Entries / CHALLENGE 76 ENTRIES / Re: Papermaking in the sun on: July 10, 2012 06:07:07 AM
Thank you!  I've made my own frames from silk screening equipment.  But everything I pulled was like tissue paper.  Which was lovely but I wanted thicker sheets.  I like to hand embroider the sheets after they are dry.  No matter how much I agitated the vat I just couldn't get enough pulp in the screen as I pulled up the frame.  This Nepalese style frame you pour pulp directly into the frame.  So you are guaranteed a thicker paper.  Of course I could have gotten thicker sheets if I had used a thickening agent.  I read where one person took frozen okra and used the slimy ooze in their vat.  That helped to slow down the rate the water went through the frame leaving more pulp in the screen.  I draw the line at putting my hands in okra slime.  My apologies to everyone who likes okra,  I hope you do try papermaking it is a fun way to cool off and be crafty at the same time.
278  JEWELRY AND TRINKETS / Trinkets and Jewelry: Completed Projects: General / Re: Dragons Blood Stone Necklace on: July 10, 2012 05:41:34 AM
Thanks, Wednesday I find out if it won at the fair.
279  Archive of Past Craftster Challenge Entries / CHALLENGE 76 ENTRIES / Re: Papermaking in the sun on: July 09, 2012 06:49:12 PM
Thanks for looking.  Papermaking is a lot of fun and kids have a great time.  It is best to have a separate blender for crafting.  I still have some pulp so I will do some paper casting tomorrow.  Soapmaking molds work well for paper casting.  Then if you need a decorative element it is a lot lighter then clay.  I use these mostly to decorate books.

Thanks for your kind compliments

280  Archive of Past Craftster Challenge Entries / CHALLENGE 76 ENTRIES / Papermaking in the sun on: July 09, 2012 03:44:30 PM
Papermaking is my favorite hot weather hobby. You get to make paper and play in water at the same time.

Paper scraps.

A couple of days ago I took the scrap paper from the die cut scalloped hearts and set the paper to soak in a 15 quart steel pot. Today I heated up the whole mess. This was to further the break down of the paper and also to kill anything trying to live in the concoction.  I just heated it to a gentle simmer and then turned off the heat and let it cool down.  

Making paper can be a rather slimy hobby.  Once I retted a batch of corn husks. It was really repulsive. It is also a way to really upset your neighbors.  There are a lot of good books out there on making paper from plant fibers. I like "Papermaking with Plants" by Helen Hiebert.

Paper scraps and water inside blender.

Recycling paper is an easier and less smelly way to make paper.  It does need to soften and break down before putting it in the blender.  It is a good idea to plan out any experiments before starting to pull sheets.  This is because some additions to papers need to soak before using.  It also takes the fun out of papermaking to stop everything and hunt for supplies.  Which is what I did anyway.

Blended paper in blender jar.  This is very thick usually the contents would have more water but I wanted extra thick paper.

First I took two large handfuls of paper pulp and blended it with 3 cups of water for 3 minutes and then added 5 pieces of the botanical after removing the seeds.  Then I pulsed the pulp another minute.  I poured the pulp onto a bowl.  Then processed another two large handfuls.  Then I rinsed the blender jar, (not in the sink), unless your best friend is a plumber.  Never leave equipment with paper in it!

The botanical I added to the paper.  If I remember right these are called angel wings.  I put purple and pink angel wings in the paper pulp.

Setting up frame and wash tub.

Outside I set up a wash tub and the paper frame.  Then I added water to the tub so it was just a little higher then the bottom of the frame.  That is important for a Nepalese style frame. The pulp must be floating above the paper screen when the pulp is poured.  I then stirred the pulp and poured it into the frame.  I shook the frame a little to even the pulp a bit.  Then pulled the frame up and let the water drain.  

Draining the pulp from the paper frame.

The first page failed totally!  The second went a lot better.  I was able to couch it onto some couching sheets.  In all I had made 3 pieces of paper when I decided to do something special with the last sheet.  I went inside and got some mica chips that were part of the rubber stamping equipment.  I had a little oops and the paper will have more sparkle then intended.

Removing the frame from the sheet.  The frame is fastened to the plastic grid using Velcro.

Couched sheet of paper

Then all the equipment got rinsed of the pulp and dirt.  A draw back of working outside is some dirt in the water and one piece of paper has some grass in it.  When cleaning never rinse the pulp down drain!  Be sure to clean everything as you use it.  One time I had left a piece of paper in the blender jar and it welded itself to the jar.  Next I put a piece of wood over the paper and then weight it down with the other equipment.  The weight will squeeze the water from the paper and helps to form a sheet.  Tomorrow I will see how the sheets are doing.


The final product!


I only do papermaking when it is hot which isn't very often here.  I hope everyone will try this at least once.  You can use an embroidery hoop with silk screen like fabric or even just pour into cookie cutters.  Not great looking paper but it was fun!  I appreciate any comments.  Thanks for looking.

Updated update with finished paper.
Yesterday my boyfriend was going to make some turkey.  I asked why not roast it.   He replied "there is something in the oven".  I looked and the paper was still drying.  So I took out the paper and he got his turkey.   This morning I yelled at him that the pot on the stove wasn't a custard.  He said "he didn't know what it was but I was sure it was for crafting."  He is the primary cook in the house which is a good idea.  Ever since I tried to break down paper in the microwave oven.  I kept putting a bowl of pink shredded paper into the microwave over a two day period. He asks before eating anything I make!  Anyway here are pictures of the finished paper.

Some papers I put fabric paint into the pulp and it did not stir in but floated in the pulp.  So I left the pulp alone and when I pulled a sheet it came out bloppy.  Here is a picture of the bloppiest piece.

Here is a picture of my papercasting.  I used a heart shaped candy mold.  This was my first time molding with pure paper scraps.  Usually I use cotton linter to make castings.  The problem with the linter is that it does not dry quickly. And will start to mold before it dries.  But this time the problem was with the possum. 

The casting finally dried and they came out beautifully.  In fact they were very smooth compared to the paper sheets.  But I did make the sheets extra thick and didn't weigh them down while drying.  Instead I dried them separately in the oven and then weighted them down under some books.

Hollow inside of molded heart.

Finished outside of molded heart.

Damage to casting from opposum!

Drying sheets of paper.

Dried paper sheet.  I had added mica chip to get the sparkle.

Pages: 1 ... 26 27 [28] 29 30 ... 45

only results with images
include swap threads
advanced search

Latest Blog Articles
@Home This Weekend: An Orb For Your Yard
Tute Tuesday: Bamboo Project Bag
How Does Your Garden Grow?

Comparison Shopping

Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...

Follow Craftster...

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2017, Craftster.org an Internet Brands company.