A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Cookie Policy | Terms | Site Map
Welcome, Guest.
Please login or register.
JUNE NEWS ANNOUNCEMENT: Have you seen the Craft Challenge announcement?  Check out the details here!
Total Members: 311,993
Currently Running With Scissors:
284 Guests and 3 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop
  Show Posts
Pages: 1 2 [3] 4 5 ... 11
21  PAPER CRAFTS, SCRAPBOOKING & ATCs (ARTIST TRADING CARDS) / Paper Crafts: Completed Projects: General / Meta Gecko papercutting and watercolor on: March 08, 2013 10:27:55 PM
So I just posted about the big art project that I did for the "Art for Arthritis" benefit in my hometown, so I'll paraphrase here. In addition to the big auction piece, the artists and their mentoree artists also create a smaller piece for a silent auction. We made this papercutting, called "Even This Gecko is Meta."

It's (obvs) a big gecko, but all the lacy cut-outs are smaller geckos, each a little different. My mentoree artist came up with the concept and design for this one all on her own! We did the watercolor backing with the same blending technique as the other piece, but in vibrant greens and blues. I stupidly didn't get a pic of the framed final product before it went to auction, but I framed in in a black gallery frame with a wide charcoal outer mat and a thin, dark teal inner mat. It looked really sharp. This one is 18"x18".

Work in progress. We both went through a box of Pac-Man bandaids over the course of these two projects. Smiley I've been preparing a collection of papercuttings for an upcoming show (I'll post pics soon!), and I think I might be single-handedly keeping X-acto and Bandaid in business. Smiley

22  PAPER CRAFTS, SCRAPBOOKING & ATCs (ARTIST TRADING CARDS) / Paper Crafts: Completed Projects: General / Re: City map papercutting and watercolor (pics, pics, pics!) on: March 08, 2013 10:12:04 PM
yoopidou Thanks! We took a lot of breaks, and did the work over several sessions, so it was definitely manageable. She was really a trooper, though. She just picks up on technique so fast, you can't even tell which parts she did and which parts I did.
23  PAPER CRAFTS, SCRAPBOOKING & ATCs (ARTIST TRADING CARDS) / Paper Crafts: Completed Projects: General / Re: City map papercutting and watercolor (pics, pics, pics!) on: March 08, 2013 10:06:12 PM
leather and lace OMG. OMG! You need to realize that I literally (LITERALLY) just ran a lap around the house squealing! I'm completely honored and flabbergasted and humbled that you've followed my work through all this time! I can't even express how much it means to me that anyone finds my stuff appealing enough to remember, let alone inspiring. Thank you, thank you so much for your kind words. Smiley I do hope you'll share your paintings soon, I can't wait to see!  
24  PAPER CRAFTS, SCRAPBOOKING & ATCs (ARTIST TRADING CARDS) / Paper Crafts: Completed Projects: General / City map papercutting and watercolor (pics, pics, pics!) on: March 08, 2013 06:04:04 PM
So my city has a big art benefit auction called "Art for Arthritis" every year, to raise money for juvenile arthritis research. Local artists are paired with a child who has juvenile arthritis, and they create a piece together to be auctioned off at a big fancy gala with all the city bigwigs. This is my second year as a mentor artist for the event, and it's a lot of fun.

This year, my mentoree artist and I created a lacework papercutting of a map of our city, Wichita, KS, entitled "Home, Sweet Home." The benefit auction was last night, and it took the second highest bid of the night, with an outright bidding war! Anyway, this took us about 20 hours, and over 100 x-acto blades (the tips kept snapping off). Most of the streets are 1-2mm wide, and the whole thing was as delicate as a spiderweb when it was done.

We mounted it on a large watercolor background that we did using a lot of water and a lot of pigment, letting the colors flow and blend without brushstrokes. We used shades of red and orange to reflect the colors of the city flag and the patina of our iconic Keeper of the Plains, by Blackbear Bosin (a 44-foot metal American Indian sculpture that stands guard over us at the city center, a symbol of our city). The finished piece is 18"x24", and 28"x32" framed, with a red and grey double mat. Stay tuned for process pics!

We drew the map out, using Google Maps as a reference. You'll notice that we drew it backwards, so that when we cut it, the clean side would face the right way. Bonus kitty helping.

Started from the center outward, saving the big pieces for last.

My mentoree artist, working hard! She just turned 13, and is such an articulate, intelligent, thoughtful young lady. This is our second year working together, and we've had such a great time. Smiley

All cut out! We just loved how it turned out- you can see the cloverleafs on the highways and the rivers, with the big stripe across the middle and up and down the center US-54 and I-135 respectively; all the random white squares are some of the larger parks, and the two masses on the bottom left and right are Mid-Continent Airport and McConnell AFB, respectively.

This is the most accurate pic of the watercolor backing, I couldn't seem to get a good pic of the color once it was framed and glass in the way.

Finished product!

And a bonus pic of the Keeper, part of our inspiration:

25  CLOTHING / Costumes: Completed Projects / Re: Iron Man Mark II Arc Reactor (with process pics, of course!) on: February 14, 2013 10:56:09 AM
Nope, no wholesale mesh here. The center piece is a bell-style faucet aerator. Included in the package are several pieces of wire mesh in a few different degrees of fine-ness, as well as several other parts that ended up being crucial to the final look of the arc reactor. I used two of the pieces of mesh that were included, one finer than the other, and fit them together with the pattern offset.

I found my faucet head in a box of spare parts in the garage, but you can get them at your local hardware store for a few bucks. Look for the one labelled "designer bell-style faucet aerator" (like this, although mine was polished nickel, not polished brass).

26  MORE ART, LESS CRAFT / More Art, Less Craft: Completed Works / Re: "Alive," final piece in Sentient Machinery collection- lots of process pics!! on: January 14, 2013 03:28:57 PM
Yay, thank you!
27  NEEDLEWORK / Needlework: Completed Projects / Re: Iron Man and Captain America cross-stitch iPhone case. on: November 10, 2012 07:00:37 PM
I love it, what a great idea! Where did you find the case? Stony is nice, but I may have to make myself a Science Bros case, lol. Smiley
28  CLOTHING / Costumes: Completed Projects / Re: Iron Man Mark II Arc Reactor (with process pics, of course!) on: October 28, 2012 01:38:47 PM
Thanks, everyone! I always love when people share some how-to or process photos when they post their projects, so I try to do the same (yeah, I know I tend to go overboard, lol). I've seen some really great arc reactors out there, but it bugs me how many cosplayers are so secretive of the construction process, like it's a trade secret or something. Everyone should have their very own arc reactor!

I'm really excited about getting the rest of the costume done (I wish it could've been before Halloween, but alas...). I've got the guts of my old computer torn up, the flash components from two cameras, and a whole mess of EL light wire and aluminum stripping all ready to go into the gauntlets. I'm looking forward to some nice cozy fall nights holed up in the workshop (or my "lab" as I like to call it) making this costume come to life. 
29  CLOTHING / Costumes: Completed Projects / Iron Man Mark II Arc Reactor (with process pics, of course!) on: October 22, 2012 09:57:46 PM
OK everyone, I finally have a moment to breathe, so heres a little (i.e. extremely long and detailed) tutorial about how I made my Iron Man Mark II arc reactor, with tons of pics and thorough descriptions of the process!

I am a ridiculous fan of Iron Man and all things Marvel Comics as well as costuming, so I decided to make Tony Stark's mech test framework as seen in Iron Man I; just the arc reactor, gauntlet and arm frame, and palm repulsors for now, the boots are going to be a Christmas break project (gauntlets are currently a WIP). Smiley Ooooh, and I'm so excited about the palm repulsors, I'm rigging up a camera flash so that even though they'll glow with continuous LED's, when I cock my hand back, they'll also flash like a boss. Squee!! Anyway! On to the arc reactor!

This will eventually be the end result:


I had all these materials in my garage, but you can get them all at your local hardware store, I estimate that the materials will cost $30-50, depending on how fancy you get.


    -Clear acrylic patio table ring with plug (mine came from a pool and patio store, you can also order one here, make sure it has the ring and the center plug)

    -Large staples like what you use in a staple gun (mine were 9/16 or 14mm)

    -Designer bell-style faucet aerator

    -Either individual LEDs with necessary resistors, wiring and tape (try Radio Shack, remember not to use acid core solder), OR ribbon-style pre-wired LEDs from your local auto supply store, like these Flex-LEDs

    -24 gauge copper wire

    -22 gauge brass wire

    -A round mirror about the same size as the acrylic plug (I popped mine out of a makeup compact, it was about 2 in diameter)

    -Plastic regular size mason jar lid (my local hardware store sells these individually, farm supply stores tend to have them pretty cheap, too), like these

    -Solder with flux or acid core (or Tacky Glue and silver metallic paint, Ill get to that later),

    -Black craft paint

    -Silver and gold metallic nail polish (I used Sally Hansen Xtreme Wear in Celeb City and Golden-I, just make sure its a very fine, very concentrated flake that looks more like metal than glitter)

    -Clear nail polish

    -Wire coat hanger

    -Super glue

    -Hot glue

    -Three very small screws

    -Some kind of thin but stiff plastic that you can cut with an X-acto knife, like the cover of a 5-Star notebook


    -Hot glue gun


    -Paddle drill bit large enough to fit inside the center of the acrylic plug

    -Drill bit small enough for your three tiny screws

    -Soldering Iron

    -Needle-nose pliers

    -Wire cutters (or just use the cutter part of the pliers)

    -Very fine-tipped paintbrush

    -Ruler with inches and mm

    -Fine metal file

    -X-acto knife

    -AC/DCs Back in Black to help you get into the right frame of mind Smiley

OK, so start by spreading all your materials out on the dining room table, so when your husband/wife/partner/parents/roommate comes home, theyll have something suitable to freak out about. Assure them that the mess definitely wont still be there three weeks after youve finished the project. Now that the mess is out of the bag, put on your jams (or the Iron Man movie) and make yourself a snack and a gin and tonic. Youve done a good job so far!

Now you want to separate the acrylic plug from the ring, and drill out the center of the plug. I recommend not doing this at the table, and using a clamp would probably be a lot safer than just holding it with your fingers (who says I did that? Nobody saw anything). Youll see in the following pic that my paddle bit wasnt quite big enough (you want the hole big enough that the wide end of the faucet can nestle loosely inside). I cleaned it up later and made it more round with my X-acto and file.

The ring part has two lips, youll want to trim one of them off with the X-acto knife. In this pic, you can see that the plug has been drilled out (left), the ring has been trimmed and Ive started with the staples (right), and the piece of ring that I trimmed off is in the upper right corner.

I used the staples to create segments for the copper wire, so it looked more like the wire was part of something that could actually conduct a current, rather than just wrapped around a patio table ring. So that the staples stayed in place, I trimmed each with my wire cutters so it didnt extend past the end of the inner part of the ring, then bent a corner so it would stay in place. Once I pressed each into place, I used my pliers to crimp the bent part into place so it wouldnt budge. I made 18 even segments (9 segments of copper, use your ruler to make sure theyre evenly spaced) so the 3 prongs of the final piece each line up with a copper segment (looks more intentional that way, rather than just decorative, youll see when I get to that step).

Using your black craft paint, paint several layers of black on every other segment on both the front and back, so the light wont shine through the wires and make it look inauthentic.Try to avoid getting paint on the staples.

When the paint is dry, start wrapping every other segment with the copper wire, trying to keep it smooth, tight, and even, bumping each piece up against each other (there will have to be some overlap to cover all the black, since its a radial shape rather than linear shape). I anchored the wire ends on the back of the staples, and tucked the ends under, as you can see here.

Ta-da! Time for another drink and Iron Man II!

Now comes the fun part (or frustrating part, depending on how many gin and tonics youve had by now). Youll want to cut little tiny pieces of the brass wire, so that you can solder them to the staples. If you dont have flux or an acid core in your solder, it wont want to stick, and youll end up with drops of solder stuck to everything but what you want it to stick to. ANYWAY. I purposely didnt get too tidy here, I wanted it to look like it was made under duress in a cave with a box of scraps.

You can also use Tacky Glue to glue the wire bits on, then paint the globs of glue with silver paint or nail polish once its dried. I like to make things difficult on myself, so I used the random unlabelled solder I found in the garage, because I like to make 15 trips to the hardware store to track down the right kind when the first kind didnt work. The second pic shows that I put the plug back in place to make sure that I didnt put the brass wires too close to the center for it to fit. The plug will be a tight fit with all the staples and copper wire, so just be firm but gentle to get it back into place.

Now take the plug back out, because were going to paint the black perforated ring. I looked all over the garage, hardware store, craft store, and interwebz for an appropriate substitute to no avail, so I decided that I would just have to break out my mad paint skillz and make it happen. So I just free-handed a black ring with holes with several coats of black, then coated it in clear nail polish to seal it in.

OK, this next pic shows two steps. First is making the plug that you just painted look like an actual, oxidized piece of metal. To do that, I dipped my finger in a little bit of the silver nail polish and rubbed it around the surface of the plug, concentrating most of it around the outer edge. Dont be afraid to get messy, you can wipe excess off with a damp paper towel. Imperfect is the goal here, you want it to look naturally oxidized.

The other bit in the pic is from the faucet aerator. If you unscrew the back and take it apart, you should end up with two silver metal pieces, two mesh screens, two clear acrylic washers, and 2-3 plastic pieces. Dont lose any of it, and FOR THE LOVE OF GOD, remember how you took them apart so you dont waste 45 minutes fumbling like an idiot because theres a thousand different ways they could possibly go together and you dont remember which of those ways is correct!

I used the gold nail polish to paint the plastic pieces (they hold the mesh in place and are visible in the final product, so I wanted them to look like metal (gold-titanium alloy, maybe? Eh? Eh?). When the nail polish was dry, I dipped my finger in a little of the black craft paint, and rubbed it into the crevices and textured bits (wiping away excess with a damp paper towel), so it also looks oxidized.

You really want to use your fingers for these steps, a brush is too precise and wont give it that built-in-a-cave, battle-damaged, oxidized look.

Now were going to make a spring to go around the faucet. Its not really part of the original design, but it hides some of the LED guts, adds a nice textural element, and diffuses the light a little. I made two springs, but well worry about the other later.

Get your hanger (NO WIRE HANGERS!! JK, you need one here), and cut the long straight part off. Hold the end firmly with one end of the copper wire, and wrap it tightly around the hanger, keeping it tightly and closely coiled. I suppose I made about a 2 coil, but I stretched it a smidge to open the coils and trimmed some, so YMMV. I twisted the ends together, then popped it onto the faucet, where it hugged a groove nicely and stayed in place. Never mind the other pieces in the pic, we arent there yet.

Now youll need to reassemble the faucet, leaving off the back metal piece and the solid plastic piece with the stem, since theyll block the light and make it too tall. Eventually youll have to put a drop of super glue around the edge to keep it all together without the back piece, but dont do that yet because youll need to trace part of it in a later step, and youll need to take it apart to do so. Heres the pieces weve done so far assembled. Nothing is glued, theyre just sitting together, just to make sure everything is fitting as it should.

Here it is sitting in the mason jar lid. Theres plenty of wiggle room, but youll need that for the LEDs.

Use your X-acto knife to cut a rectangular hole in the mason jar lid on the side near the base to accommodate the LED wire. Youll be able to kind of see it in the following pics, I tried to make it pretty subtle.

Now you need to paint the entire inside and outside of the lid (not the back that goes against your skin though, if you use spirit gum and actually wear it, it could pull the finish off). Use the silver nail polish for this, it really looks like metal. I used 2-3 coats, and made sure I really got it in all the grooves.

Next it needs to be oxidized (after the polish is dry), so use your fingers and the black craft paint again. Rub the paint all over, concentrating in the grooves, and wiping away excess with a damp paper towel. Streaks, fingerprints, and splotches are all desirable imperfections; remember, were shooting for battle-damaged here.

And its definitely time for another drink, and maybe a pizza.

OK, here is a fiddly bit. I used the stiff plastic cover of my 5-Star notebook to make the little 3-prong cage thing (henceforth referred to as The Assembly) that sits over the top of the center of the reactor. Before I reassembled and glued the faucet, I took the part that holds the mesh in place (the small part thats visible that i painted gold), and traced the inside of the circle onto the plastic.

Now VERY SLOWLY AND PATIENTLY AND CAREFULLY use your X-acto to cut out a circle about 1mm inside what you just traced, then cut out on the line that you just traced. You should now have a ring where the widest diameter is the same size as the smallest diameter of the faucet piece. Still with me? Anyway, you should cut the inside first, because its otherwise impossible to hold onto that little piece and get an even circle.

Now cut three rectangles, about an inch long and 2mm wide. I carved a center groove in each, then painted these and the ring with the gold nail polish, front and back. After they were dry, I burnished each with the black paint as I did in the above steps. The grooves pick up the paint, and make it look like a piece of cast metal.

I super-glued them all together with super glue flat on the table, then glued them to the plug, which I of course dont have a pic of. Note: make sure that when viewed from above, the ring is on top and the prongs are underneath. Since The Assembly was flat on the table, I used the acrylic ring to make sure that the three prongs lined up with a segment of copper (with two copper segments between each prong).

While in that step, I marked on the ring where the prongs would fit, and drilled tiny pilot holes for the screws while the glue dried. Once it was dry, I super-glued The Assembly to the ring, lining the prongs up with the pilot holes and making sure the whole thing was centered (youll need to trim off some excess length, I made it so they ended just under the screw heads).

Once the glue is dry, put in your screws, and re-insert the plug into the ring (very carefully, it will be a tight fit and now theres a bunch of little wires and bits that can be easily dislodged).

See! Its purty!

Now you want to glue your round mirror to the inside bottom of the mason jar lid. I used hot glue for this. My mirror came out of a makeup compact, which I heated up with a heat gun (a blow dryer works too) to loosen the glue.

Whee, its time to wire your LEDs! If you feel like making a circuit board, go ahead. In all honesty, its not that hard, but you need to bone up on some basic electrical skills first, which can be intimidating for a beginner. Heres a nice Instructable if you really want to earn bragging rights. If youre lazy or otherwise time constrained, use the pre-wired strips. You can certainly get more precise placement if you wire them from scratch, but if you put enough reflective surfaces on the inside, it wont matter much. I used the super-bright tape kind from the auto supply store, which have a convenient adhesive strip and can be trimmed to length (dont look directly into them when lit, yo. Seriously, theyre bright. The finished arc reactor will light up the entire room, no joke).

I pulled the strip through the hole that I cut in the lid, and after some measuring and cutting, stuck them around the perimeter so the lights shine inward. The power switch is the kind that you have to keep pressed down, so if you want an on/off switch, you need to rewire one. I got mine at Radio Shack, and now I can turn it on and leave it on.

Get your wire hanger piece and more copper wire out, and make another spring, maybe 5 inches long this time. Twist the ends together, and spot-glue it on top of the LED strip with a very tiny amount of hot glue, so that neither the glue or LED tape will be visible when everything is assembled. The acrylic ring and plug will sit on top of the LEDs, rather than nestle inside, once its all assembled.

OK, now remember how I told you not to lose all the parts of the faucet aerator? In all likelihood you did, and now those extra parts are on the floor or in the cats mouth. You need to find the two clear rubber washers that came in the faucet. Youll super-glue these together, then glue them into the narrow end of the aerator. This will raise it up a little and allow the light to shine through the center; otherwise, the very center of the arc reactor will be dark, and we dont want people to think youre in danger of shrapnel because of a malfunctioning electromagnetic heart.

You may now proceed to super-glue the washers together, then to the faucet, then super-glue the faucet to the very center of the mirror, widest end facing up. Be sure to test the lights first, to make sure they shine through the center. If not, youll need to come up with something else to raise the aerator and let the light shine through.

Now nestle the ring into the mason jar lid, adjusting it to find where it fits most snugly. I lined it up so that one of the prongs of The Assembly pointed down and lined up with where the wire comes out, which I intend to hide in my epic cleavage. Looks a little less random this way. Once you find the right position, spot glue it with hot glue on the back of the copper segments, using an X-acto knife to trim away any visible glue that squeezes out. Youre all done, time for a dance party!

All lit up!

Dont forget to leave your mess for the rest of the household to observe and admire!

Time to party, you just made a nuclear-plasmic electromagnet with a fully-integrated miniature particle accelerator! Fuck yeah science, get on wit yo bad self! Hopefully you finished it sometime in the middle of the night, so you can stick it to your chest with double-stick tape and prance around in the house pretending to be Tony Stark. Dont forget to put on a tank top and take a bunch of pics with it shining through your shirt, then lie in bed and marvel about how Tony can possibly sleep with the fucking beacon of Gondor shining out of his chest. Yay!

30  MORE ART, LESS CRAFT / More Art, Less Craft: Completed Works / Re: "A.I." part of my Sentient Machinery collection on: May 09, 2012 08:55:06 AM
Thanks! I've used it with acrylics, but not with much success. The paint is thicker, so when you pull off the mask, it pulls big chunks of dried paint with it. The watercolor is absorbed into the page, so unless you using almost pure gel/cream pigment, there's nothing there to get pulled off. Maybe if you try thinning the acrylic, it would work the same as the watercolor?

I've not tried it with oil, but I don't think it would work; the longer you leave the mask on the surface, the more it binds to it and is harder to come off. With the long drying period and flexible, sheet-like finish of the oil paints (in combination with the lengthy amount of time the masking fluid will be left on it), I don't think it would work out all that well.

But hey, most of the art techniques we have today are the result of accidents and experimentation, so I may be proven wrong! Smiley
Pages: 1 2 [3] 4 5 ... 11

only results with images
include swap threads
advanced search

Latest Blog Articles
Machine Embroidery: not just for tea towels
Tute Tuesday: Ribbon Ice Cream Cone
Stars In Your Eyes

Comparison Shopping

Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...

Follow Craftster...

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2017, Craftster.org an Internet Brands company.