A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Cookie Policy | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Need help? Click the HELP link at the top of the screen to read the docs or ask at the Help Desk.
Total Members: 313,352
Currently Running With Scissors:
393 Guests and 12 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop
  Show Images
Pages: [1] 2 3
1  Re: New (Tiny) Art Journal in Paper Crafts: Completed Projects: General by erdbeerblau on: January 17, 2017 09:07:13 AM
Erdbeerblau I would find it helpful to see pictures if you have time to show what you mean. I'm trying to imagine what that looks like but I haven't got a lot of experience book binding so I'm a bit confused...

Alright … I don't have a book to show you right now, but I tried to make a quick sketch. (blue is the spacer, green the regular paper)

Basically you can insert as many spacer layers as you need, I guess it needs a bit of experimenting to see what works best. I have made a few books using a spacer around every other signature, and what works fine too.

I hope this makes it a bit more clear? Smiley

Report to moderator  THIS ROCKS  
2  tutorial: quick and pretty fabric advent calendar in Winter Holidays by erdbeerblau on: November 27, 2013 04:23:29 AM
I made an advent calendar, and as I think it’s pretty cute I made a tutorial.

It was done in about an hour, so this would be just the right project for last-minute crafting.

Basically it’s a long strip of fabric, sewn together at one end. Everyday, one opens one bow and one sweet will come out.

You will need:
- fabric
- ribbon
- number tags (I attached the file with the ones I used at the end)

- scissors
- hole punch 1 and 1 3/4 inch (optional)
- stapler to attach the number tags to the ribbon
- needle and thread, or a sewing machine

Cut your fabric:
The strip of fabric should be wide enough to comfortably wrap the biggest of your sweets with a bit (at least an inch) of overlapping.

To determine the length of your fabric: Arrange all the sweets in a line with about one inch of space between each of them. Measure how long your line of sweets is, then add 5 to 10 inches at every end – This is the lenght of fabric you will need, probably you will need to piece it together.  If you want, you can seam the rectangle, I didn’t bother to do so.

Then sew the one end shut as shown in the sketch And, tadaaa: You're done. Now it just needs to be filled.

To fill it, start with the closed side. Put in one sweet, tie the section off with a piece of ribbon and attach the tag with the number 24 to the ribbon. Then repeat until you reach number 1.

If you have questions, please ask!

I also added the file with the numbers: For the smaller circles I used an one-inch circle punch. The larger ones are 1 3/4 inch in diameter. The file is in A4 format, but I laid everything out in a way that it should work on letter-format paper as well.
Report to moderator  THIS ROCKS  
3  elf slippers that became court jester in Shoes: Completed Projects by erdbeerblau on: November 10, 2013 05:11:46 AM
Hi everyone Smiley

As my old slippers were falling apart, I made new ones.
The post with the old ones, containing the tutorial/pattern

People keep telling me that I look a bit insane wearing them, but I like them Smiley
The fabric is so soft and fluffy, like velvet with a very short pile? And the colours are so great!!!

Making of (Maybe this helps with the pattern?)

Report to moderator  THIS ROCKS  
4  steampunk-ringmaster-fairy in Halloween Costumes by erdbeerblau on: November 09, 2013 10:04:17 AM
Hi everyone! I haven't posted here in a while, but I wanted to share my halloween costume. I started it more than a year ago, but I got it finished the day before the halloween party!

I was going for steampunk-ringmaster – I don't know if that worked, but I really like how everything turned out.

I made:
- The corset
- the shirt with the insane collar
- the whip (wood turning and all)
- the jewellery I wore in my hair
- the skirt
- the petticoat
- the bloomers that went under the petticoat (best thing ever for a party in november!!!)

I wore my great brown suede boots with the costume, sadly that's a little hard to see on the pictures.

close ups of the corset:

the finishing steps of the corset, you can see the hooks I used to close it here

And the bloomers, that were very handy but mostly hidden under the petticoat. The petticoat was a monster to sew, it's huge.

Sorry for the grumpy face, btw. I'm not sure why all of the pictures are so stern, but probably because we were late already and in a hurry Wink
Report to moderator  THIS ROCKS  
5  Leather Mask in Costumes: Completed Projects by erdbeerblau on: May 07, 2012 05:05:36 PM
Last Summer I decided that I would need a leather mask. I have been interested in working with leather for quite a long time, so I gave it a try and made a mask to wear at some fancy-dress ball.
It was only my second attempt at working with leather, so it was pretty much just trial and error.

I used a very old purse my grandmother gave me for the leather (and that has literally fallen apart all by itself at that point)
I also decided that a plaster mold of my head was something I really had to have, but more on that later. I guess it's time for pictures now:

And on my creepy plaster head

Here is the creepy mold of my face all by itself. It kinda creeps me out, looking all dead and, well, creepy. But it really helped in the process, so I'm glad to have it.

And: Action shot. Excuse that lame tired-after-the-party-at-6-in-the-morning-version of myself

Thanks for looking!
Report to moderator  THIS ROCKS  
6  Jackalope/Deer Antlers *TUTORIAL* in Completed Projects by erdbeerblau on: April 26, 2011 11:14:34 AM

Last Summer I made a Jackalope and got some requests for an antler-tutorial.
original post
It's been lying around on my desktop almost finished for half an year because I had to move twice since then and everything was a bit annoying. But now as everything is back to normal again, I finished the tutorial.


what you need:
wire (preferably that plastic covered stuff that's used in walls as it won't rust when covered in paper mache – and if you want to wear them, you can use wire in the color of your hair!)
masking tape
wallpaper paste
old newspaper
hot glue
paint: i prefer water based paint for this project – i used gouache for my antlers. you will need black, white, a not too yellow-ish green, ochre, and red
transparent varnish or sealer (preferably not glossy for a more realistic look)
pliers: something to cut the wire and something to press the ends flat, universal pliers work fine
screwdriver or anything pointy

They make a great weekend project, as the small amount of paper mache takes just a few hours to dry. I did the pair for the tutorial in 2 evenings, two or three hours each time
don't forget to make two  Wink

I would suggest to look at pictures of real antlers before starting.

At first we're going to bend the wire:
the size of your finished antler is defined by the length between the tip/end of your wire and the first bend. Dont't cut the wire yet, wait until you formed the whole "z"-shape like I did in the picture.
Use your pliers to press the bends on the pointy end of your antler as flat as possible. Every point consists of a piece of wire that's bent two or three times. You can choose to make your antlers bigger by adding more points.
Depending on what you're planning to do with the finished product, leave at least half an metre of wire on for attaching your antlers. I'm planning to make an headband out of them and i will be using the wire as the headband, so i left about an metre of wire on just to be sure it's enough.

The two different pieces will make the different points.
Cut both pieces about the same lenght, it's way easier to handle them that way.

Twist the individual points and wrap them together at the bottom of the antler. Wrap a single strand of wire around the very bottom of the antler to get the characteristic shape.
Then just secure the loose ends somehow, I made loops so I could hang them to dry. Also, this will be the "handle" while you are painting everything in the end.

The masking tape will get you a smoother surface and the paper mache will stick so much better. It's a good time to get the overall shape right, but make sure that you don't add too much material to the tips. I added a few layers of tape to the bottom end to simulate the part where the antlers attach to the deers head (Basically this makes the part you wrapped the wire around in the last step a more defined and life-like)

If your antlers look at least remotely like that, it's time for the paper mache  Grin

Prepare lots of narrow strips of newspaper before you get your hands sticky. You will also need the wallpaper paste and a paint brush at this point.

I think that part is pretty self-explanatory. Add paper mache until both pieces have a nice even shape. It doesn't have to be perfect as the surface will be worked on in the next step.

Take fine strips of newspaper and twist and fold them a little. Then attach them to the antlers with your wallpaper paste, using a screwdriver or something similar to get the shape right. This will give your antlers the typical, slightly furrowed surface.

Now you can hang them to dry for a few hours.

Deer antlers usually have this little dots/balls/whatever they are called at the bottom of the antler, gradually starting getting smaller and fewer towards the top.
I get the effect using my hot glue gun to ad lots of tiny dots of glue. It can be a bit of a problem to get the paint on there in the next step. It  really helps the paint to adhere if the glue gets a light coat of hairspray before you start to paint.

Time for painting, you are almost finished!
First paint the whole thing in a bone-ish color and let it dry. I mixed ochre, white and a tiny bit of red to geht a result I was satisfied with.
After the "bone" has dried, add the dark brown layer. I mixed ochre, black, a bit of white, a bit of green and a bit of red to get the right color. Wipe the dark paint off from the parts where the bone shows through as long as the paint is still wet. Just imagine how the deer basically does the same by rubbing his antlers against trees and fighting with other deers Wink It doesn't have to be very exact, just don't take away too much of the brown.
After the paint has dried completely, add at least one or two coats of varnish or sealer to seal your antlers and make them waterproof. If you used water soluable paint before, apply the first coat carefully.

Tadaaa, you are done!
Now you can attach your new antlers to whatever you think deserves some.

I wore mine at halloween Smiley
(the loose ends of the wire are simply woven into the hairstyle)

all pictures on flickr
You can find the tutorial is on my blog as well.

I hope everything is clear, but I guess the obscene amount of pictures will make up for the lame descriptions  Wink
If you have any questions, feel free to ask!
Report to moderator  THIS ROCKS  
7  Re: Zombie, Pirates, and Ninjas Ornaments: Craftalong for Christmas 2010 in Craftalongs by erdbeerblau on: May 27, 2010 01:19:29 PM
i made a robot-ornament for may. actually, i made it  while ago, but totally forgot to post it.



it's a bit hard to see the details, as it's silver pins and sequins on silver glitter  Roll Eyes
Report to moderator  THIS ROCKS  
8  Re: Zombie, Pirates, and Ninjas Ornaments: Craftalong for Christmas 2010 in Craftalongs by erdbeerblau on: April 13, 2010 02:58:17 PM
here we go:

i don't know. maybe he is missing something, ideas anyone? i don't want to make a mouth tough.

that's "mustache". i think he is adorable.

i made his mustache and eyebrows out of a strand of my own hair, because my trees colours are silver and purple.

i went crazy and made 5 ornaments in the last few days, all in the same style. but i will wait until their month has come  Cool

Report to moderator  THIS ROCKS  
9  jackalope (abstract taxydermy in geometric shapes) +tutorial+ in Completed Projects by erdbeerblau on: April 09, 2010 05:35:19 AM

I made a tutorial for the antlers:

hi everyone!
i made this for my father who is a hunter, but also works a lot with autocad and stuff like that.
in fact it is a very conceptional piece, but i won't bore you with the details.
i got the basic pattern there: http://i33www.ira.uka.de/pages/Research/Projects/PaperModels/Bunny.html
it's an abstract version of the stanford bunny that i modified a bit.

it is folded of thick paper, filled with foam and then covered in a thin layer of wrinkled paper mache to give it some texture.

i also made the antlers: the left picture is from when they still were very shiny, the picture of them hanging is the final product

progress-shot and the unmodified test-bunny

the foam was a pain. i filled the head slowly – lots of layers – and about a week after it was all dry, it collapsed. damn thing … so i filled all the little hollow spots on the surface with wood cement. (read: it took hours and hours to get the damn think fixed)

comments and criticism are more than welcome!
Report to moderator  THIS ROCKS  
10  Re: Zombie, Pirates, and Ninjas Ornaments: Craftalong for Christmas 2010 in Craftalongs by erdbeerblau on: April 07, 2010 12:17:37 PM
i decided that we desperately need some pictures, so there's an in-progress-shot featuring
-a purple mustache (made of my own hair  Grin) for the mustache ornament,
- a pirate hat for the pirate ornament and, finally:
- LOTS of styrofoam balls – i was out of them after the first ornament and couldn't get new ones until today.

i think i will make all of my ornaments like the zombie, then i'll have a matching set in the end :-)

now i just need to cover a million styrofoam balls in glitter  Wink
Report to moderator  THIS ROCKS  
Pages: [1] 2 3

only results with images
include swap threads
advanced search

Latest Blog Articles
@Home This Weekend: An Orb For Your Yard
Tute Tuesday: Bamboo Project Bag
How Does Your Garden Grow?

Comparison Shopping

Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...

Follow Craftster...

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2017, Craftster.org an Internet Brands company.