Craftster Community

CROCHET => Crochet: Completed Projects => Topic started by: mk_carroll on July 06, 2006 10:22:52 PM



Title: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: mk_carroll on July 06, 2006 10:22:52 PM

A simple crocheted beanie for a Pullip doll, using a sportweight yarn. This was a really quick project, one that's going to be easy to fancy up with appliques, ear flaps, pompons, all that sort of thing. This will also fit a Blythe doll - if you want a tighter fit on a Blythe, skip one or two rounds of increases.

Don't crochet?  Wish you could knit one?  knit pattern is here! (https://www.craftster.org/forum/index.php?topic=126137.0)

I used:
Peace Fleece "DK" sportweight, olive roots
crochet hook C/2-2.75mm (next time I might go up a hook size and do one less round of increases)

Make a slip knot loop and sc 6 sts into the loop; tighten loop.
begin increases
1) 2 hdc into each st (12)
2) *1 hdc, inc 1* (18)
3) *2 hdc, inc 1* (24)
4) *3 hdc, inc 1* (30)
5) *4 hdc, inc 1* (36)
6) *5 hdc, inc 1* (42)
Stop increasing. Start checking the fit after row 10 to get the length you want.
7 - 13) hdc ea st
done!


Title: Re: Basic Beanie for Pullip doll
Post by: Manji on July 07, 2006 12:55:32 PM
Where did you get that doll?


Title: Re: Basic Beanie for Pullip doll
Post by: Missklo on July 07, 2006 01:22:37 PM
Aww.  That doll is so cute and so is her hat!!!


Title: Re: Basic Beanie for Pullip doll
Post by: mk_carroll on July 07, 2006 08:26:32 PM
Where did you get that doll?
I've gotten both of my full-size Pullip dolls from Magma Heritage (http://www.magmaheritage.com/).  You can also find them on eBay. 


Title: Re: Basic Beanie for Pullip doll
Post by: Aelita on July 07, 2006 09:37:25 PM
wow very expensive dolls but they sure are cute


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: goldencrafter on July 08, 2006 09:55:00 PM


THANK YOU THANK YOU. I have mini Pulip Alice in pink and have been thinking about making her some clothes. This hat would be a great start I will probably add a flower or bows to wonderland it up.


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: kseiznickska on September 27, 2006 03:16:40 PM
Looove your Rovam! Love the hat! I wish the pattern was for knitting though. I have tried on many occasion to learn how to crochet, and for the life of me I just can't figure it out!!!


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: MoxZ on September 28, 2006 06:04:42 AM
Oooh snorgle snorgle!  She's so adorable and hip in her hat!


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: mk_carroll on October 03, 2006 07:03:43 PM
Love the hat! I wish the pattern was for knitting though.
Knit version?  Can do!  I'll get crackin'.


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: Double Oh Sarah on October 05, 2006 05:35:55 PM
Super cute. :) It's kinda too bad that it's so affordable to make them clothes but the dolls themselves are so very expensive. :p I wisted this though, because you never know !


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: Effylicious on October 09, 2006 09:18:55 AM

A simple crocheted beanie for a Pullip doll, using a sportweight yarn. This was a really quick project, one that's going to be easy to fancy up with appliques, ear flaps, pompons, all that sort of thing. This will also fit a Blythe doll - if you want a tighter fit on a Blythe, skip one or two rounds of increases.

I used:
Peace Fleece "DK" sportweight, olive roots
crochet hook C/2-2.75mm (next time I might go up a hook size and do one less round of increases)

Make a slip knot loop and sc 6 sts into the loop; tighten loop.
begin increases
1) 2 hdc into each st (12)
2) *1 hdc, inc 1* (18)
3) *2 hdc, inc 1* (24)
4) *3 hdc, inc 1* (30)
5) *4 hdc, inc 1* (36)
6) *5 hdc, inc 1* (42)
Stop increasing. Start checking the fit after row 10 to get the length you want.
7 - 13) hdc ea st
done!

Ugh! You have a Rovam, don't you! I wanted her forEVER, but by the time I was able to get her, she was sold out. D:

Such a cute beanie, too! Someday I'll get a Pullip and make her this beanie ♥


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: craftyandnappy on October 09, 2006 03:53:28 PM
Cute beanie, I will have to make one for my Blythe!


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: Chic-a-Cherry-Cola on January 16, 2008 02:01:58 PM
Ok, will someone help me with this?

I'm pretty confident about this pattern, I'm still a noob, but I'm a fast learner. I think I know what I should be doing... Except for the last bit on ever line.

I mean:

inc 1* (18{or other number})

Seriously, what the hell does that mean?


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: jpoparock on March 06, 2008 02:32:09 PM
Thanks for these tutorials. I've been using them to make many cute hats for my dolls, and a couple of dread-lock style wigs.


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: mk_carroll on July 20, 2008 03:46:53 PM
Ok, will someone help me with this?

I'm pretty confident about this pattern, I'm still a noob, but I'm a fast learner. I think I know what I should be doing... Except for the last bit on ever line.

I mean:

inc 1* (18{or other number})

Seriously, what the hell does that mean?

I am really, really late to this, so you've probably already gotten the answer - but that number at the end tells you how many stitches you will have when the round is completed. It's used in a lot of written knit and crochet patterns, but I can see how it will throw off a newbie!


Title: Re: Basic Beanie for Pullip doll (will also fit Blythe)
Post by: animegirlie on October 09, 2008 11:26:50 AM
what's the diameter of the hat when finished? I was goofing around with tiny yarn trying to make up a pattern for a hat, and I'm just wondering if I might be able to give it to a Blythe fan.