A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Joining an Organized Swap? Please review the rules and info on a regular basis.
Total Members: 296,602
Currently Running With Scissors:
795 Guests and 28 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop


Pages: [1] 2 3 ... 13
Jump to page:
  Show Images Only     Send this topic  |  Print  |  Bookmark  
Topic: Tutorial: Reversible tote bag  (Read 279631 times)
Tags for this thread: tote , tutorial  Add new tag
Share the love... Pin it Submit to reddit add to Wists
1+
 
gloriana
« on: April 20, 2006 09:44:59 PM »

I made this tote bag for the Sew? I Knit!-along (website is here - http://www.sewiknit.blogspot.com) and thought I would offer a tutorial.  It's a fairly "classic" style  - but I've made it a little more hip with retro fabric from Reprodepot:



Here's the tutorial:

Finished dimensions
19" long
14" high
21" long straps

Ingredients

1 yard of fabric A (here, the print fabric)
1 yard of fabric B (here, the solid, or "lining" fabric)
1/2 yard sew-on Velcro (you can use stick-on if you want but I prefer the sew-on kind)
interfacing (optional - if your fabric is on the lighter side)

Directions

Cut out your pieces-
Two 20" x 15" rectangles each from fabric A and B (these will be the BODY of the bag)
Four 9" x 8" rectangles each from fabric A and B (these will be the POCKETS - there are 4 in all)
Two strips, 2 1/2" wide and 50" long, each from fabric A and B (these will be the STRAPS)

[This would be the time to add interfacing if you're using it - either sew or iron it on to the body pieces and the straps; the pockets won't need it.]

Prepare the pockets-
1. Pin two pocket pieces together along one long (9") edge.  Stitch, trim the seam, turn right side out, press.  
2. Cut four pieces of Velcro (furry side) each 4" long.  Center one piece about 1" below the topstitched edge of the pocket.  Stitch in place, making sure to only go through one layer of fabric.  This will be the inside of your pocket.
3. Topstitch 1/4" from the top edge of the pocket.  You can also stitch the raw edges together at the other three sides, if you'd like.
4. Prepare the other three pockets in the same way.



Attach pockets to body pieces-
1. Lay out one of the body pieces, with a long side (20") at bottom.  Find the center of the fabric by folding it in half and making a crease.  Do the same with one of the pockets.  Line up the centers and the raw edges and pin the pocket to the body piece at the bottom center.  Pin down the bottom corners and the sides.
2. Before you pin the top corners down, you need to attach the other half of the Velcro to the body of the bag.  Cut 4 pieces of Velcro (prickly side), each 4" long.  Use the furry half of the Velcro on the pocket to mark the position of the other half on the body piece.  Pin the prickly Velcro in place and stitch down.



3. Pin pocket to body at top corners.  Stitch the pocket in place on three sides.  (Yes, the raw edges of the pocket are showing - but don't worry!  They'll be covered by the straps.)
4. Prepare the other three pockets in the same way.

Sew body pieces together at sides and top-
1. At bottom corners of body pieces, cut out a 2x2" square.  (You're going to do a square-bottom for the bag - as in the Jordy tutorial here - http://www.craftster.org/forum/index.php?topic=32204.0).
2. Pin body pieces together at sides.  (Make sure to pin 2 fabric A pieces together and 2 fabric B pieces together).  Stitch and press seams open.  Do this for both fabric A and fabric B.  You now have two pieces (which I'm just going to call A and B at this point).
[If you want to add a closure at the top of the bag - such as some ribbon ties, or a loop on one side for a button attachment, now is the time to do it.  Pin the tie(s) to the raw edge of A, pointing downward.]
3. Turn A rightside out and slip it inside B (which is still wrongside out).  Pin the two pieces together at the top of the bag, matching the side seams.  Stitch, trim seam, turn rightside out, press, and topstitch 1/4" from the edge through both layers of fabric.  The bag now has a finished edge at the top and raw edges at the bottom:



Adding the straps-
1. Press in 1/2" on both long raw edges of each strap piece.  Use a high setting and plenty of steam to make sure these pressed edges stay flat.  Repeat for all 4 strap pieces.



2. Measure the height of the bag, from top to bottom at the center.  (If you're following my measurements, it should be 14 1/2").  Measure in 14 1/2" from each end of each strap piece and mark these places with pins.  The portion of the strap in the middle of these two markers will be the bit of the strap that sticks up over the top of the bag.  The end bits of the straps are going to be stitched down to the bag itself.
3. Lay out an A strap with the pressed edges facing up.  Place a B strap face-down on top of it.  This will give you a double-faced strap with pressed edges facing inward.  Pin the strap pieces together between the two markers.  Stitch the straps together 1/4" in from these edges.  Leave the ends of the strap separated for now.  It should look like this:



4. Now you're going to stitch the strap ends in place to the body of the bag, with the pressed edges over the raw edges of the pockets.  Lay out the bag with side A facing up, and lap the ends of strap B over it.  Mark the placement line for the strap as follows: measure 3/4" in from raw edges of the pocket and 6" from the side seam.  Lay the edge of the strap along this line and pin in place.  This will center the strap (which should be 1 1/2" wide) over the raw edge of the pocket.  Do the same for the other side of the pocket with the other end of strap B.  Topstitch 1/4" from each edge of the strap, making sure to only stitch through ONE layer of bag fabric.  The best way to do this is to open out the B side of the bag while sewing, so that it doesn't get caught underneath.  Make sure also that you stop short of the top edge of the bag when you're sewing your topstitching on the straps.  Once you've finished sewing down one side of the strap, do the same with the other side.  (This will be strap A sewn to side B of the bag).  Then repeat with the second strap.



5. Once the straps are all attached to the bag, you need to stitch closed the little gaps near the top edge of the bag.  Sew through all thicknesses to secure the straps to the top of the bag:



Finishing-
1.  Now all that's left is to sew up the bottom of the bag.  Turn everything inside out and pin the two bottom pieces of A together.  Stitch, trim seam, and press open.



2. Fold each corner of A so that the side seam and bottom seam meet in the middle.  Stitch across this seam and trim.  Repeat at the other corner.  (You can refer to the Jordy bag tutorial if you're not clear on this part).
3. Pin the two bottom pieces of B together.  You're going to leave an opening in the middle of B - in between the two straps - so that you can turn everything rightside-out again.  Stitch two seams in the bottom of B - ending and then beginning just inside the straps.  
4. Sew the two corners as you did for A.  Trim all seams.
5. Pull the rightside of the bag through the hole in the bottom of B.  The last step is to close the hole in the bottom of B - you can do this by turning in the seam allowance and topstitching very close to the edge of the fabric (as I did) or you can slip-stitch it closed.

Your bag is now done and can be used on either side.  Here's what the reverse side looks like:



I hope this is clear!  Let me know if there are any questions.
« Last Edit: April 16, 2009 05:41:02 PM by jungrrl - Reason: fixed a coding issue. - don't mind me! » THIS ROCKS   Logged

Check out my knitblog - A Mingled Yarn
http://amingledyarn.wordpress.com
Qwerty
« Reply #1 on: April 20, 2006 10:04:22 PM »

wow! your messanger bag tutorial was awesome, and this one is superb! great job and a BIG thanks for sharing!
THIS ROCKS   Logged

Moek
« Reply #2 on: April 20, 2006 11:23:31 PM »

Thanks for making a tute! that's an excellent tutorial for an excellent bag.
    I've also bookmarked it Kiss
THIS ROCKS   Logged

setting up shop...
http://troupe.etsy.com

just started a wist too...
http://www.wists.com/moka
muchachaK
« Reply #3 on: April 21, 2006 05:19:30 AM »

Awesome, thanks for posting the tutorial!
THIS ROCKS   Logged

You need a handbag...  www.muchachak.com
mata
« Reply #4 on: April 28, 2006 05:36:49 PM »

Very nice bag & tutorial.. I'm definitely going to try this soon  Cheesy
THIS ROCKS   Logged

Mirmaid81
« Reply #5 on: April 28, 2006 06:21:51 PM »

Shocked  Wow this is so awesome!! This will definitely by on my have to try list. Thanks for the tut.  Cheesy
THIS ROCKS   Logged

bluepie
« Reply #6 on: May 04, 2006 09:19:09 AM »

Hi Gloriana....

I made your messenger bag and now I am on to this tote...your tute is well done and looks very clear, but i did have one question....the straps are 50" pieces and i did have a yard of fabric , however, i had to piece some together since i didn't have one entire piece 50" in length..am i missing something or did you have to do this too? thanks
deb
ps...thanks for sharing all your great stuff!
THIS ROCKS   Logged
gloriana
« Reply #7 on: May 04, 2006 03:22:18 PM »

Hi bluepie - I had to piece the straps together for one of the fabrics, but not for the other.  I guess if you have a 58/60" wide fabric you should be okay.  Sorry that wasn't clearer!
THIS ROCKS   Logged

Check out my knitblog - A Mingled Yarn
http://amingledyarn.wordpress.com
ellesbelles17
« Reply #8 on: May 04, 2006 09:17:12 PM »

I love it!! The fabric is really cool too!!! Plus your tutorial is really great and easy to follow. Cheesy Cheesy Cheesy
THIS ROCKS   Logged
bluepie
« Reply #9 on: May 15, 2006 10:06:19 AM »

HI Gloriana...

Just wanted to say thanks for the great tute !! your instructions were very clear and it was fun to make...I finished it yesterday...I'd like to post a photo - wht is the best way? Can i just add a link?( haven't posted any pics yet) anyway..the only hard part was that it took me about 6 hours to make...I think because all the strap sewing was time consuming...am i  slow or did it take others a while?
BTW- did u create the pattern yourself? mine is a hawwaiin print that i really love...thanks again for sharing
deb
THIS ROCKS   Logged
Threads you might like:
Pages: [1] 2 3 ... 13 Jump to page:
  Send this topic  |  Print  |  Bookmark  
 
Jump to:  



only results with images
include swap threads
advanced search



your ad could be here!

How-To Videos
Antwone Fisher Talks About A Boy Should Know How to Tie a Tie
Jimmy Gownley Reveals His Favorite Books
Terra Elan McVoy Talks About After the Kiss
Robert Ferrigno Reveals Who He Admires Most
A.J. Jacobs Reveals What Readers Think About Him
Latest Blog Articles
July 23, 2014 Featured Projects
Tute Tuesday: Fabric and Felt Bird Ornament
Cardboard Tube? Craft Supply!

Comparison Shopping




Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...
Moderators

Follow Craftster...






Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2014, Craftster.org an Internet Brands company.