I finally found a use for all the duds from my crappy CD burning programs. Here's what it looks like:http://www.weblogimages.com/v.p?uid=Felixthecat37&pid=149883
Thats what it looks like from the front...http://www.weblogimages.com/v.p?uid=Felixthecat37&pid=149884
A sad attempt at a side view... (I'm sorry, i've got bunk beds so it was a bit hard to take the picture. http://www.weblogimages.com/v.p?uid=Felixthecat37&pid=149885
And the but! Okay, if you want to make one yourself, you'll need:
-4 CD's (colors are great!)
-2 coat hangers
-A candle or lighter (candles work best.)
-Needle nose pliers
Step one. Cut the coat hanger at bottom and use needle nose pliers to straighten it completely.
Step two. Heat one end of the coat hanger and then press it against the CD in the spot that you want the "rod" To go through.
Step three. repeat across from that hole. (I realy suggest you use CD burning CD's because this is alot eaiser with one. I used the last line for my rod holes.)
Step four. Repeat steps 2 and 3 on the remaining disks.
Step five. Poke rod's through the holes. 2 CDs on each side of the rod.
Step six. Bend up the excess and then cut it off.
Well... uh... there ya go! if you have trouble or have questions/comments E-mail me at Soccargal55@aol.com