Im taking part in the summer nerd games and this is my first entry.
Its a pirate tricorne hat like the ones found in Limsa Lominsa in FFXIV
Just a quickie pattern if you want to make one like it!
Items You Need
Red Yarn -RHSS
Heather Grey Yarn - RHSS
Stitch Marker (I use a little piece of contrasting yarn and just pull it out and replace it at the beginning of each row so I dont lose my place when working in the round)
I started in the center of the hat forming the "beanie" of it first. My gauge with Red Heart on a G Hook is 4st x 4st gives me one square inch. The drop on this hat is only 7"...you dont want it to come down to your eye brows before you begin the brim or it will look really odd. So the beanie portion is 22" wide and the drop is 7".
I worked in the round and did NOT
slip stitch chain 1 at the end of each row. I used a stitch marker and just kept working in the circle.
The hat only uses single crochet. When I say "sc inc" it means sc two times in that one stitch.
Row 1) 6 sc in a magic loop circle. Cinch your circle closed and continue to row 2 (6)
2) sc increase in each stitch around (12)
3) *sc, sc inc* around (18)
4) *sc 2 times, sc inc* around (24)
5) *sc 3 times, sc inc* around (30)
6) *sc 4 times, sc inc* around (36)
7) sc around (35)
*sc 5 times, sc inc* around (42)
9) sc around (42)
10) *sc 6 times, sc inc* around (48)
11) sc around (48)
12) *sc 7 times, sc inc* around (54)
13) sc around (54)
14) *sc 8 times, sc inc* around (60)
15) *sc 9 times, sc inc* around (66)
16) sc around (66)
17) *sc 10 times, sc inc* around (72)
18) sc around (72)
19) *sc 11 times, sc inc* around (78)
20) *sc 12 times, sc inc* around (84)
21) *sc 13 times, sc inc* around (90)
22-26) sc around (90)
That was it for the part that sits on your head...we are now continuing on to the brim. No need to fasten off ...just keep working in the round.
27) *sc 6 times, sc inc* around (102)
28) *sc 7 times, sc inc* around (114)
29) *sc 8 times, sc inc* around (126)
30) *sc 9 times, sc inc* around (138)
31) *sc 10 times, sc inc* around (150)
32) *sc 11 times, sc inc* around (162)
33) *sc 12 times, sc inc* around (174)
34) *sc 13 times, sc inc* around (186)
35) sc around (186) Slip Stitch, Fasten off.
Attach Gray Yarn
36) *sc 14 times, sc inc* around (198)
37) *sc 15 times, sc inc* around (210)
38) sc around (210) Slip Stitch, Fasten off.
I made the end where I fastened off the back of the hat.
So now you have a great big floppy disk. Turn the hat inside out so that when you fold the edges up in a "tricorne hat shape" the "right side" is facing out on the sides.
I figured it is more important that the sides that everyone can see are the right side of the crochet fabric, as opposed to the top of the hat...fewer people will see that.
After flipping it "inside out" just shape it however want it to look.
Its about personal preference. I did not want my edges to be too sharply folded. I like the rounded corners. Once you find how you want it to look then just use the complimentary yarn, cut a few strands and sew it to keep it that shape.
When you are sewing the outside just enter a stitch and take the working yarn into a hole that is above and on stitch to the right or left. Just like you are cross-stitching. This will make the stitching nearly impossible to see. I learned this by "accident". I sewed the red and then I sewed a few strands through the gray also.
I hope this made sense.
Take care and arrrrr.