I wasn't sure where to put this, so I just picked a board
For the latest hoopla swap I knew I wanted to create something based on one of my favorite, and my partner's favorite, television shows- Firefly. I decided to embroider a part of the opening theme song, but I needed the perfect fabric to stitch it on. After searching the local fabric stores, I decided to create my own galaxy fabric!
Starting with a piece of plain black cotton fabric.
Add a little diluted bleach and scrunch the fabric
Dry the fabric
And then proceed to completely cover the bleached parts with paint, so you can't tell you bleached it.
When I started painting I wanted to just add highlights and dimension, and I ended up covering everything.
Now the stitching can begin! I was worried about how I would transfer my design to my newly created galaxy print- but luckily I found a pack of colored carbon paper at JoAnn's. You can also see the finished fabric.
Forty hours of satin stitching later and the piece is complete! I used glow in the dark thread for this piece to give it a little punch. I am not sure I would ever do this much satin stitching with glow in the dark thread again. I had to un-do knots every other stitch.
I think the end result was totally worth the hassle though!