A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Please remember to SEARCH before asking a question that may have already been answered. Thanks!
Total Members: 299,134
Currently Running With Scissors:
732 Guests and 14 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop


Pages: [1]
Jump to page:
  Show Images Only     Send this topic  |  Print  |  Bookmark  
Topic: Savvy Tote - Step by Step Tutorial  (Read 8322 times)
Tags for this thread: tote , tutorial , sponsored_project , totebag  Add new tag
Share the love... Pin it Submit to reddit add to Wists
1+
 
SewingRepublic
« on: September 09, 2009 11:09:00 AM »

Sponsored Project - Savvy Tote from SewingRepublic.com


Savvy Tote

by Nicole Smith



Materials

  • 1 1/3 yard of 45" wide oilcloth, vinyl or heavyweight fabric
  • 1 1/3 yard of 45" wide lining fabric
  • 1 set of 5 1/2" wide purse handles
  • 1 magnetic purse snap
  • Two squares of interfacing each 4" x 4"


Steps

Cutting
Use a 1/2 " seam allowance.

1. Cut two 21" x 15" rectangles for the bag front and back, two 15" x 7" rectangles for the bag sides and one 21" x 7" rectangle for the bag bottom from the oilcloth and bag lining.



Sewing

2. From the oilcloth pieces, pin one bag side to the bag front with right sides together matching the 15" raw edges. Mark 1/2" from the bottom edge. Sew the side seam from the top to the marking at the bottom, leaving 1/2" unsewn at the bottom.



3. Repeat to sew the second side piece onto the other 15" side of the bag front, leaving 1/2" unsewn at the bottom edge.



4. Pin the oilcloth bag back to the two sides matching the 15" edges. Sew the same way you sewed on the front, leaving 1/2" unsewn at each bottom edge.

5. Pin the oilcloth bag bottom to the assembled bag with right sides together and the raw edges even. Fan out the corners of the bag at each bottom corner as shown.



6. Sew around all of the bottom edges, pivoting at each corner. To pivot, leave your needle down in the fabric when you come to each corner. Lift the presser foot and turn the fabric in the new direction. Lower the presser foot and continue sewing as normal.



7. Fold two pleats on the top edge of the back of the, and two on the front. The bag shown has two pleats that are spaced 8" apart and 2" deep. Pin the pleats and baste them in place on the sewing machine 1/4" from the raw edge.



8. Bag Lining
Follow all of the same steps above to construct the bag lining, but be sure to leave an 8" opening along one of the side seams for turning the bag right-side-out.



9. Fuse a strip of interfacing to the wrong side of the bag lining front and back, centered along the top edge. Mark snap placements on the bag lining and install following the snaps instructions. Place each snap centered about 1" below the top raw edge.



10. Cut four 4" x 1/2" rectangles from the oil cloth for the handle straps. Pin two together with wrong sides facing and sew along the two short edges with a 1/4" seam allowance.



11. Lace one strap through a purse handle, matching the 4 1/2" edges. Center it along the top edge of the bag front matching raw edges. Baste in place with a 1/4" seam allowance. Repeat for the bag back.



12. Turn the lining inside out, and place the oilcloth bag right-side-out inside the lining so that right sides are facing together.



13. Carefully line up the top edges, pin in place, and stitch all the way around the edge with a 1/2" seam.



14. Through the 8" opening left in the lining, turn the bag right-side-out. Slipstitch the opening closed after turning.



15. Finger press the edge of the top seam over, and hold in place with clips (binder clips work great and wont leave holes in the oilcloth like pins will), edgestitch all along the top edge.



TIPS FOR WORKING WITH VINYL:
  • Lengthen your stitch to a little longer than normal. A normal stitch can sometimes create a perforated edge in vinyl.
  • Try leather or denim needle. Theyre stronger and can handle the vinyl better.
  • Load your machine with a Teflon or roller foot. If you dont have one, try placing a piece of tissue paper over the sticky side of your vinyl if it comes in contact with your presser foot. Try putting a piece of masking tape on the bottom of your regular presser foot and it will glide over the oilcloth with ease.



« Last Edit: September 09, 2009 11:11:08 AM by the craftster admin (leah) » THIS ROCKS   Logged
MadeByMo
MadeByMo
Offline Offline

Posts: 10
Joined: 11-Sep-2009

Inspired by Nature


View Profile WWW
« Reply #1 on: September 11, 2009 01:43:37 AM »

lovely bag
THIS ROCKS   Logged
Threads you might like:
Pages: [1] Jump to page:
  Send this topic  |  Print  |  Bookmark  
 
Jump to:  



FacebookTwitterPinterest
only results with images
include swap threads
advanced search



your ad could be here!

How-To Videos
How to Create a Sepia Effect in Paint.NET
How to Create a Simple Flash Movie in Flash CS3
How to Create an Oil Painting From an Image in Paint.NET
How to Create an Outline Text Effect in Photoshop CS3
How to Create Circular Text on a Path in Photoshop CS3
Latest Blog Articles
Handmade Gift Ideas: Hostess Gift
Handmade Gift Ideas: Mini Book Jewelry
Handmade Gift Ideas: Bunny Travel Pillow

Comparison Shopping




Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...
Moderators

Follow Craftster...






Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2014, Craftster.org an Internet Brands company.