I recently purchased a new truck. Well, it isn't exactly NEW, but it is new to me. The truck came with a heavy duty trailer hitch. Immediately after seeing the square hole in the back, my mental gears started turning. You see them everywhere, those store bought trailer hitch covers. There are tons out on the market ranging from boat props and dancing deer to simple sport team logos. Well, I wanted something different, so I made my own. And this time of year is the perfect time to find those oh so special items.
I made my first hitch cover with my favorite horror movie killer Jason (we have to stick together). With a simple nut and bolt through the chest and into the hitch plug, you have a one of a kind hitch cover. I even installed a camera on my plate to see when people get too close. Everyone wants to get an up close look at this guy.
Next, in keeping with the items found during Halloween season them, I wanted something to slip over those plain old trailer hitch balls. I wanted a hand and so be it, I got one. I had to put some wood dowels in the outer finger to keep them more in an upright position. Then, I used some fishing line and a needle to thread through the hand to keep the fingers down and in the position I wanted. Yeah, some other hand gestures came to mine, but the cops around here don't like that. In the mean time, THROW UP YOUR ROCK HAND. Party on.
Halloween is my favorite holiday and it will be here before you know it. My usb flash drive mod obsession is always on my mind. Put these two statements together, and you get my latest creations. Is it possible for something to be both cool and creepy? I think so. With some Halloween fingers, usb flash drives, hot glue, and a hot knife, you too can give some geek "The Finger". Enjoy
I know it has been a while since I posted anything, and yes, I have been really busy. But this latest creation is just too cool not to mention. I have made my very own Han Solo in carbonite USB flash drive. I made a mold of a carbonite figure with some molding latex (i can't remember where I got it, but it is food grade, chocolate bar carbonite Han Solo anyone?) Anyway, I made my mold, opened up a usb flash drive and inserted it into the mold. I acquired a melting pot recently and have been dying to try some utee casting. So I melted up some clear utee and a little darker utee for color (can't remember if it was hematite or something else). I melted and blended the mix, poured in the liquid and voila, instant Star Wars geekery. I tested the drive to make sure it works and it works great. And for an added bonus, the read/write light actually shines through the material. You can't see through it, but the light can shine out. Odd but a very cool unexpected bonus. I am such a geek and I am ok with that. Fire up the backpack jets, I'm outta here.
I absolutely love making these. Easy to do, fun, unique and one of a kind, and the the possibilities are ENDLESS. Here are some of my latest coasters. Skull beads and bones never go out of style. And yes, the green skulls and beads glow in the dark. How cool is that. I used the resin from Lowes (don't let the sales guy tell you it won't work), beads (Ebay is full of deals for beads), and my imagination. Enjoy
So, what do you do after watching a Terminator marathon and suffer from an over active imagination and random spare parts in the shop? Well, you make some terminator hands of course. I founds some pvc pipe and fittings, some scrap wood, silver spray paint, and some metal looking contact paper. OK, so I had to go buy the contact paper, but it was worth it. I even used two different sizes of piping for the forearm to simulate the "bones". I think they turned out pretty good. I'm still trying to figure out a good place to hang them. Maybe after I reorganize my shop, I can find a better place. But for now, I have them hanging from the rafters (perfect reach height and out of the way) and using them to hang my hats, crafting boggans, and my crafting apron (yes, the apron came from another fellow craftster). Anyway, enjoy. Now all I have to do is figure out how to make a body and head. Hmmmmm........
So I just had to post these. I dabble with woodworking (as you can see from some of my past projects), but this time I wanted to do something a little more traditional. For Christmas presents to my parents and my in-laws, I made some end grain butcher blocks. End grain butcher blocks are better for your knives and they show less cut marks after use (as apposed to standard side grain cutting boards). I made them from hard maple and Brazilian cherry. I routed out a notch on each side for handles (makes it easier to pick up) and some self leveling feet. They measure out to be about 13 inches deep, 18 inches wide, and 2 inches thick. They are definitely hefty and should last forever. I love these things and they were relatively simple to make, just a little time consuming. A big thanks goes out to thewoodwhisperer.com for showing me how to do these. Now I need to make one for myself. Enjoy
Actually, if I can make more of them and figure out how to get my etsy page up and running, I will have to make them available. You can buy these online for $100 and up. But I'm sure I can make them for less. Keep on the look out.
At the request of others, I decided to enter this in the challenge. If I win, maybe I could get something other than yarn. If not, I will gladly donate it to someone who can use it. (I do not possess those skills yet). I am reposting this, since I do not know how to "move" a posting. Anyway ------------ Here is one of my latest completed projects. We came upon an old storage ottoman that had been in the family FOREVER. I was instructed not to throw it out, to keep it for sentimental reasons. But, I was NOT given any boundaries as far as what I could do with it. Therefor, BANG, my very own One Eyed Flying Purple People Eater. I skipped on the "One Horn" thing for now. Being a typical guy, I only had horn idea in my head and I don't think the rating on this site would approve. lol. I stripped everything down to the bare bones of the old ottoman. Covered it with thick batting, purple fur, and felt face and wings. The jiggle eyeball gives it that crazy look. I added 5 non-marring wheels to the bottom, so as to not scuff up my new wood floor. And the long pegs on the inside of the lid keep the lid from moving around when being used as seating. Now, lets see just how much trouble I get into from the family once they see it. Keep your fingers crossed. lol
Here is one of my latest completed projects. We came upon an old storage ottoman that had been in the family FOREVER. I was instructed not to throw it out, to keep it for sentimental reasons. But, I was NOT given any boundaries as far as what I could do with it. Therefor, BANG, my very own One Eyed Flying Purple People Eater. I skipped on the "One Horn" thing for now. Being a typical guy, I only had horn idea in my head and I don't think the rating on this site would approve. lol. I stripped everything down to the bare bones of the old ottoman. Covered it with thick batting, purple fur, and felt face and wings. The jiggle eyeball gives it that crazy look. I added 5 non-marring wheels to the bottom, so as to not scuff up my new wood floor. And the long pegs on the inside of the lid keep the lid from moving around when being used as seating. Now, lets see just how much trouble I get into from the family once they see it. Keep your fingers crossed. lol