A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Do you have an idea for improving the Craftster swap process?  Suggest and discuss it here on the Talk About The Swap Process board.
Total Members: 299,134
Currently Running With Scissors:
699 Guests and 15 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop

  Show Images
Pages: [1]
1  I need help making a Round Pencil Case in Purses, Bags, Wallets: Discussion and Questions by e.r.i.k.a on: March 21, 2005 07:44:20 PM
I'm trying to make a cylindrical pencil case about 12" long with a zipper and lining. Something like this:

{Please excuse my cheesy paintbrush drawing}
Does anyone have a pattern or know where I can find one?  If not, any tips you can provide?

Anything and everything is appreciated!
Report to moderator  THIS ROCKS  
2  TUTORIAL: Make a Lined Zippered Pouch in Purses, Bags, Wallets: Completed Projects: General by e.r.i.k.a on: January 17, 2005 06:33:00 PM
I have been dying to learn how to make a lined, zippered pouch FO-EVER!  I've tried and tried with no success until today!  I used dyabolica's post (http://www.craftster.org/forum/index.php?topic=10165.0) to guide me.  I'm making this tutorial only because I felt like a little elaboration would benefit those of us who are a little more inept.  

Here goes:

Step 1: Assemble your ingredients. I used 6 1/2" x 10" fabric pieces and an 8" zipper.  


Iron your fabric to get it flat -- I'm not fantastic about getting all the wrinkles out, as you can see.

Step 2: Place the zipper WRONG SIDE UP on one piece of the exterior fabric.  The fabric should be RIGHT SIDE UP.   Pin in place and stitch along the top part of the zipper using your zipper foot.

Step 3: Once the first exterior is securely sewn to the top portion of the zipper, place one of the lining fabric pieces, WRONG SIDE UP, directly on top of the zipper.  Line up the edges and stitch in place right along the top.  Ultimately you'll be stitching on top of the previous stitch.




Step 4: Now open it up by separating the lining and exterior fabric and folding over the lining so that the WRONG side of both fabrics are facing each other.  Here are two views of what you should have up to this point. The zipper should be sandwiched between the two fabrics.  I pressed the whole thing to keep it flat.


Step 5: Now you'll have to do the same thing for the other side of the zipper.  Place the remaing exterior fabric piece on top of the zipper, which should be RIGHT SIDE UP.  Line up the top and side edges. Now stitch.  Here are three different views.  



Step 6: To attach the lining, flip the whole thing over so the RIGHT SIDE of the lining is face UP.  Place the remaining lining fabric WRONG SIDE UP, directly on top of the zipper.  The RIGHT SIDES of the two pieces of lining should face each other and the zipper should be WRONG SIDE UP. Line up the edges and stitch along the top.  The zipper should be sandwiched, again.  Here's a picture before the sewing and afterwards, opened.



Step 7: Now, *VERY IMPORTANT*, flip it over and open the zipper.


Step 8: Now take the two pieces of lining and line them up with each other, good sides FACING EACH OTHER.  Do the same for the exterior, lining up the edges.  



Step 9:Pin the linings together and pin the exteriors together.  Stitch the sides of the lining together and the bottom of the linings, leaving a 3" section in the center unsewn.   Stitch the sides and the bottom of the exteriors completely.  DO NOT leave an unsewn section in the exterior.
*Just a tip:  On the sides I stitch right alongside the zipper stop to avoid having extra openings on the sides of the zipper.


Step 10: Trim the seams if necessary.  Use pinking shears if you've got 'em.


Step 11: Turn the whole thing inside out through that little opening you left in the lining.  Be careful no to tear the seams.  


Step 12: Now stitch up that remaining opening.  I have yet to perfect this.  I just stitch on top, but doing it that way makes it just a *little* obvious, I think.  If anyone has any suggestions for making this stitch more discreet, please share!  I'm DYING to know!


Step 13: Push the lining into the exterior and VOILA!  A lined, zippered coin purse!  Mine's ready for embellishment!  Silk screen, perhaps?


It wasn't really as hard as it may seem.  I spent a lot of time trying to figure out the order of steps, which I'm not naturally very good at.  Otherwise, it was a pretty simple pouch.  The zipper foot definitely helps!  

I'm terrible at sewing, so if it works for me, I'm sure this will be a breeze for all you skilled craftsters.  

I hope someone will love this.  I know I do!
Message me if you have any problems.
xoxo,
Erika
Report to moderator  THIS ROCKS  
3  Re: What to do with broken necklaces, bracelets, and other chain-y things? in Trinkets and Jewelry: Completed Projects: Reconstructed by e.r.i.k.a on: September 12, 2004 05:53:50 PM
I made this . . .
Mine wasn't made from a REAL broken chain.  I cut it up myself and tried to make it look like a clump of chain/necklace fragments.
I'm selling this one on my website, but I think it would be a fantastic way to create an edgy rock 'n roll necklace out of left over, yet valuable chain pieces. 

I strung the chain bits on a piece of sterling wire, hooked on some jump rings, beads, and a lobster clasp for authenticity and then closed it to keep it as a pendant.

Just an idea . . . Oh, and sorry about the size of the pictures . . .
 
Report to moderator  THIS ROCKS  
4  Re: Frou-frou shower curtain in Crafty Housewares: Completed Projects: General by e.r.i.k.a on: September 12, 2004 05:37:57 PM
Actually I made one last month, and had concerns about using acrylic paint -- you know, with the potential to peel off, and such.
 
I made one using sharpies on the clear vinyl.  I didn't have much want or need for colors, though since I was only drawing skulls and hearts.
The only thing I've noticed about using the Sharpies is that the bottom of the curtain, sometimes slides INSIDE the tub, even though I have a liner, as well and do not want it INSIDE, and when this happens, the Sharpie seems to bleed onto the tub.  Strangely this is not difficult to remove, and simply requires water rinsing, but it's still annoying to have to clean up when it appears.  Otherwise, I have loved having my custom made shower curtain.  And I'm not sure I could find one that had the imagery I wanted, anyway.

Here are pictures.

 

Anyway . . .
Report to moderator  THIS ROCKS  
Pages: [1]


FacebookTwitterPinterest
only results with images
include swap threads
advanced search



your ad could be here!

How-To Videos
Beef Pot Pie Recipe
How to Make Bacon Wrapped Halibut Skewers
Baja Style Fried Lobster Recipe
How to Make a Bison Burger
Grilled Large Clam Recipe
Latest Blog Articles
Handmade Gift Ideas: Hostess Gift
Handmade Gift Ideas: Mini Book Jewelry
Handmade Gift Ideas: Bunny Travel Pillow

Comparison Shopping




Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...
Moderators

Follow Craftster...






Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2014, Craftster.org an Internet Brands company.