A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Do you have an idea for improving the Craftster swap process?  Suggest and discuss it here on the Talk About The Swap Process board.
Total Members: 296,711
Currently Running With Scissors:
475 Guests and 8 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop

  Show Images
Pages: [1] 2 3 ... 11
1  Pinterest Pin Zippered Pouch in Purses, Bags, Wallets: Completed Projects: General by queenofdiy on: April 12, 2014 05:49:37 AM
So, I haven't been on Craftster since.....forever!!!  I have suddenly found myself with lots of time on my hands.  You see, I'm an Aussie who has just moved to the US (Philadelphia, PA area) with my husband and two boys (12 and 15).  My visa conditions don't allow me to work here, so I'm suddenly a stay at home Mum, which is foreign to me as I've always worked.  Anyway, I have spent lots of time on Pinterest and one pin in particular has haunted me.  It is a beautiful zippered pouch with no pattern.  I had to dig around the internet to find the actual source of the post and found it here:

http://blog.naver.com/PostThumbnailView.nhn?blogId=weebeehouse&logNo=150118184247&categoryNo=2&parentCategoryNo=0

I really, really, really wanted to try this and I searched high and low on the internet for a pattern, but I couldn't find one the same.  So, I drafted a pattern, made it, modified the pattern, made another, modified the pattern and third time lucky, I cracked it.  The result is pictured below.  I took pictures along the way and also made a digital PDF pattern.  If anyone is interested, I'd be happy to write up a tutorial.  I did consider selling the pattern, but decided not to, opting to share instead - 'cause that's what my Mum taught me.  Grin

If you want any more info, ask away!!

Report to moderator  THIS ROCKS  
2  I'm Back and celebrating with a Fabric Bucket TUTORIAL!!! in Purses, Bags, Wallets: Completed Projects: General by queenofdiy on: March 21, 2012 11:43:26 PM
It's been a while since I've been here.  Life and other stuff got in the way.   Roll Eyes  I know there are other fabric bucket tutorials out there but I make mine a little different and I'll also throw in a little extra - stamping on fabric!!!  So, here goes.

You only need a few scraps of fabric to make these cuties.  The one I show in the tutorial is a 4 inch bucket.  That's the size I mostly make as it stands up well on its own.  I've also made a 6 inch bucket for a gift that required more than a 4 inch size.  I purchased 40cm (16 inches) of fabric to make this 4 inch bucket and I can get two buckets from the length of fabric.  If you choose fabric wisely, you won't need interfacing.  I use Duck cloth which requires no interfacing.  Start by cutting out the following:

Two:  8.5 x 6.25 inch (on the fold - as shown in the photo)
Two:  2 x approx. 5 inch



Keeping the fabric folded, cut out 2 x 1.75 inch corners (Pay attention to which is the 2 inch side and which is the 1.75 inch side - refer to the photo.  The fold is the bottom edge in the photo) from both corners and from both fabric pieces.  



Mark and cut the corners:



This is what it looks like when unfolded:



Take your 2 x approx. 5 inch pieces:



Fold them in half lengthwise and press.  Fold the edges to the middle and press.  Top stitch along both lengths of each piece. These will be the handles.  Trim them both to 4.5 inches in length:



Now the fun part!!!  Grab your favourite rubber stamp - whether that be a photopolymer (clear) one, a red rubber one or one you (or someone else) have carved from an eraser.  It can be detailed or simple - it doesn't matter.  Get some felt and put on a plate.  Squeeze some acrylic paint onto the felt and using a paintbrush, 'paint' the acrylic paint into the felt so that there are no more 'puddles' of paint.  It's now an inkpad:



Press your stamp into the inked felt and stamp away onto the fabric, making sure you have reasonably even spacing.  Rotate the stamp to create a random pattern.  Here's where I started:



Keep going until the fabric is covered:



To make it look like you've cut the fabric from a bolt, you need to stamp part of the image along the cut edge.  Place some scrap paper under your fabric and stamp the image on the edge of the fabric, like this:



While you wait for your fabulous stamped creation to dry (it doesn't take very long), wash out your felt and you can re-use it.  Clean your paintbrush and plate.  By this time your stamped fabric should be dry.  Press the stamped fabric using the cotton setting, no steam.  As the bucket is unlikely to be laundered, the ink should remain permanent.  I know, because I've spilt acrylic paint on my jeans and I still haven't got it out!!!!

Onto construction of the bucket.  I use a 1/4 inch seam throughout.  Start by pressing 1/4 inch hem on the 2 edges of both the 'I' shapes as shown in the picture:



Unfold the hem and sew the side seams of both the outer and lining bags.  Finger press the seams open:



Sew the bottom corners of each bag (sorry - not an actual picture of the corner but hopefully you get the idea):



Turn the outer bag right side out:



Mark 1/2 inch either side of each side seam as shown in the photo:



Pin the handles using the marks as a guide.  There should be a 1 inch gap between one end of the handle to the other:



With wrong sides together, place the lining inside the outer bag, lining up the side seams:



Top stitch around the top edge to close the bucket.  This is where I have a confession.  All my photos show pins however I took them all out as I find pins get in the way because when I use pins, I concentrate on not running over them rather than lining up seams etc., so personally, I don't like to use them.  Here is the bucket all finished!:



Here it is next to another one I stamped using one of my own eraser stamps.  As you can see, it looks very different - just by using different coloured fabrics and stamps!:



As I mentioned at the beginning, I made a 6 inch version.  For this one, I used a clear photopolymer stamp on white duck cloth.  Here is the comparison between the 6 inch and 4 inch:



Enjoy!  As always, if you have any questions, please ask!  Grin
Report to moderator  THIS ROCKS  
3  Re: TUTORIAL: Straight Sided Triangular Cosmetic Bag in Purses, Bags, Wallets: Completed Projects: General by queenofdiy on: March 20, 2012 12:31:45 PM
Sorry I haven't been on here in a while.   Shocked  I just looked through the thread and you all have done some awesome pouches/bags!!!

To answer craftsblogger's question, I've made plenty of these in fabric with a clear layer of vinyl over the top.  Here's a picture of one (slightly larger version of the original, but you get the idea):


I don't use interfacing when I use the vinyl as the vinyl is usually enough to keep the pouch's structure.  Also, when sewing with the vinyl, I treat the vinyl and outer fabric as one layer.  When top stitching either side of the zipper, I use tissue paper under my presser foot so the vinyl doesn't stick to the presser foot.
Report to moderator  THIS ROCKS  
4  Kick A$$ Luggage in Purses, Bags, Wallets: Completed Projects: General by queenofdiy on: January 15, 2010 11:33:31 PM
So, I made my son some luggage some time back (http://www.craftster.org/forum/index.php?topic=173041.0) using this tutorial:  http://www.craftster.org/forum/index.php?topic=156560.0

It was time I made my other son some luggage too.  So, here it is!!:


Yes, it's for a boy - an 8 year old boy!!  He chose the fabric including a hot pink plain fabric for the lining!!  The outer fabric is called 'Bad to the Bone' by Robert Kaufman. 

I used a super heavy duty interfacing.  I literally wrestled with it on the sewing machine but I'm extremely pleased with the result.  The bag is empty in the picture so it is standing up by itself.  It's almost like cardboard.  I would highly recommend it.

Thanks for looking!
 Wink
Report to moderator  THIS ROCKS  
5  TUTORIAL: Pajama Pants - using a ready made pair as a pattern in Clothing: Completed Projects: General by queenofdiy on: November 06, 2009 10:13:06 PM
After reading Craftsters post on Facebook, I felt it was, again, time to give back!!  This tutorial is assuming you have basic sewing knowledge.


Firstly, choose a pair of pajama pants (or any comfy pants at that matter) with elasticized or draw string waist.  These are the ones I chose.  They are capri length - but you could do any length - from shorts to longs.



Start by turning the pants inside out.  Then place one leg inside the other, like this:



Fold the fabric parallel to the selvedge (this takes care of directional fabric).  You can fold it the other way if you don't have directional fabric.  Place the pants on the two layers of fabric:



Cut the fabric (through both layers of fabric) following the seam lines as a guide plus adding a little extra as you cut.  This allows for the fact that the pants aren't laying completely flat and the fabric you are cutting is.  Also, when you get to the seat of the pants on the outer leg, you basically cut a straight line from the hip area - DON'T follow the curve in.  The reason is that the elastic is pulling in the sides.  The same rule applies for the crotch seam.  Start cutting at the curve of the crotch seam but basically go in a straight line after the curve (refer to the photo to visualize this).  Also you need to allow for a hem at the bottom and an elastic casing at the top.  

You will also see that the elastic casing at the top of my ready made pants varies by about an inch.  That's because pants are usually 'higher' at the back than they are at the front.  This takes the backside into consideration.  I don't bother varying the waistline but you could angle the casing at the front if you desire - it gives a better fit.  In the case of my pants, it varies by about and inch from the centre back seam to the centre front seam.



How I calculate the casing:

Measure the width of the elastic then double that measurement.  Mine was approximately 1 inch wide.  I allowed 2 inches for the casing.  An explanation of how I use this calculation is further down when it comes time to sew the casing.



This is one leg cut out.  Cut another leg using this as a pattern.



Now, there are many ways to construct pants but this is my favourite as you can't go too wrong with this method.  Take one leg and sew the outer leg seam.  BEFORE SEWING THE INNER LEG SEAM - press the leg hem allowance.  It makes sewing the hem so much easier if it's pressed now.  Then sew the inner leg seam.  REPEAT for the other leg.



See where I pressed the hem first?:



Now, you've got two legs:



Turn one leg right side out:



Place this leg inside the other one:



Sew the crotch seam:



Press the leg hem again.  Also make your casing using your favourite method.  This is how I do my casings:  Remember I added 2 inches from the top of the pants?  I press the top down by 2 inches.  I then press the raw edges under enough so that the casing is 1 1/4 inches (my elastic is 1 inch).  This allows a little 'give' in the casing.  Sew the casing down leaving a gap to insert the elastic.  Thread elastic through and measure the elastic on your waist/hips (wherever you like to wear your pants).  Sew elastic together then sew the casing closed.  To avoid the elastic curling and twisting inside the casing, I sew a vertical line at each side seam to secure the elastic.  

Tip:  It's better to make a casing for your elastic rather than sewing the elastic onto the fabric.  Once you start sewing through elastic (especially lengthwise) it starts to lose its elasticity and also stretches the elastic as you are also pulling on the elastic as you stitch it to the fabric.  



Turn your pants right side out and press.  Voila, pyjama pants made from your favourite pair!!



As always, please feel free to ask any questions or if you would like something explained further.  Wink

Report to moderator  THIS ROCKS  
6  Card Holder in Purses, Bags, Wallets: Completed Projects: General by queenofdiy on: July 23, 2009 06:15:37 PM
After breaking numerous wallets because of too many cards stuffed in it, a friend suggested that I have a separate card holder.  I've seen tutorials online, but I ended up creating my own pattern.  It's about 4 inches wide x 2.5 inches high.  It fits up to about 1/2 inch stack of cards.  I have totally enclosed the side seams, including the lining (not like most card holders that have the sides just folded up and sewn).  Onto the pictures:

Front view:


Side view:


Close up of side view and inside lining.  You can see that all the side seams are encased - including the lining, not just folded up and sewn:



Inside:
Report to moderator  THIS ROCKS  
7  Stash-Busting Wallet **with added pics** in Purses, Bags, Wallets: Completed Projects: General by queenofdiy on: July 21, 2009 02:33:04 PM
It aaaages since I've posted anything.  I've been working full time for the last 6 months and haven't had time to craft.  Feels good to be back!

My old wallet fell apart (as usual, the lining gave way), so in an attempt to start stash busting, I made a new wallet.  It's about 4 x 4.5 inch.  Not all my cards fit because I have too many so I have most of my cards in a small coin pouch.  It has a pocket on one side for the cards and a clear pocket for a photo/id etc.  The other side is a zippered coin purse.  I also made a section for notes.  Next time (if there is a next time), I would change this slightly as the corners on the top on the outside are slightly different than the corners on the bottom:






**EDIT**

I made another one with slight modifications.  I made the tab closure a little tighter fitting which makes the wallet sit a little better.  I also altered the outer and lining to make it sit nicer on the outside.  You probably can't see the difference from the photos, but in 'real life' there is quite a difference:



and the inside:



Thanks for looking  Cool
Report to moderator  THIS ROCKS  
8  TUTORIAL: Tin Can Drawstring Bag in Purses, Bags, Wallets: Completed Projects: General by queenofdiy on: April 03, 2009 09:49:57 PM
This is a bag I've had in my head for ages and only recently got around to making one.  I'm making these for my boys' school teachers this easter filled with easter eggs.  I couldn't find any easter themed fabric, so I just chose some fabric in the colours the teachers would like.

Please do not sell this tutorial - even if altered in some way.  Please respect this so that these tutorials can continue.  In saying this, though, you are welcome to sell what you make using this tutorial.


OK.  Onto the tutorial.  Firstly, you will need a tin - any sized tin will do.  In saying that, it will make your life easier if your tin fits over the end of your sewing machine (you will see why later in the tutorial).  Wash and dry your tin thoroughly.  If you choose a tin in which a smell lingers, wash it in a 20% bleach solution.  It will get rid of any nasty odours left behind!!


Now you need to measure the diametre of the tin.  You can see from the picture that mine is a little under 4 inches.  You need to give yourself about 1/8th inch 'give', so I took the 4 inch measurement.


Now you need to make a circle.  The radius of my circle is half the diametre of the tin - ie. 2 inches plus 1/4 inch seam allowance therefore measure 2 1/4 inches on your compass and draw a circle:


Cut 2 circles - one from the outer fabric and one from the lining fabric:


OK.  Here's the maths.  Next you will need to work out what size your sides will be.  On your calculator, type in this:

4 (tin diametre with no seam allowances) x 3.142 (pi) =

The answer in this case is 12.56 which I rounded to 12.5 inches.  Next add seam allowances which will be 1/2 inch (1/4 inch either end of the rectangle).  So the width of the side will be cut to 13 inches.

OK.  That's the hardest part!!  Now you need to work out what height you will make your bag.  This is really up to you but there needs to be a minimum - which is the tin height, plus half the diametre, plus two seam allowances.  My measurements were:

4 1/4 (height of tin) + 2 (half diametre) + 1/2 (two seam allowances) + 1 (I wanted the bag a little higher) = 7 3/4.  Then I just rounded it off to 8 for simplicity's sake.

Therefore I cut my sides 13 x 8.  Cut one of the outer fabric and one of lining fabric


If you want, you can embellish the sides with ribbon, lace, decorative trim or whatever you like.


Fold down and press 1/4 inch along the 13 inch (circumference measurement) length of both the outer and lining fabrics:


On the wrong side of the outer fabric, make a mark 1/2 inch down from the fold:


Fold the rectangle in half so that the 8 inch sides line up (the height measurement) and start sewing from the top and stop at the fold.  Restart sewing at the 1/2 inch mark you just made down to the bottom of the seam:


Repeat with the lining but simply sew the complete seam from top to bottom:


Press seam open and on the right side, sew a rectangle around the opening of the seam to strengthen it:


Clip into the seam allowance, about every 1/2 inch or so, along the bottom raw edge:


Pin the circle to the cylinder.  With the circle on the bottom, sew the cylinder to the circle. 


Repeat for the lining:


Place tin inside the outer bag:


Place the lining inside the tin, making sure to line up the seams:


Pin the layers together:


Now, this is where you need to make sure the bag can fit under the presser foot sufficiently.  If not, you will need to hand sew the layers together then sew another line of stitching to form a casing.


Sew two lines of stitching as shown below to form a casing (whether the stitching is by machine or hand will depend on whether the bag fits under your machine's presser foot):


Thread ribbon or cord through the casing and knot the ends to secure.  Fill with whatever and enjoy!!  You can also use the tin to hold 'stuff' if you push the top of the drawstring bag down into the tin, like this:

Report to moderator  THIS ROCKS  
9  Drawstring Tin Can Bag in Purses, Bags, Wallets: Completed Projects: General by queenofdiy on: March 28, 2009 02:30:28 AM
I've had this project in my head for ages and I've finally done a prototype.  I'm going to use these to give as teacher gifts for my boys' school teachers and fill them with chocolate eggs for easter - but with more, well, easter themed fabric!!:


And...this is what is between the outer and lining fabrics!!  Well not really the dog food, but an empty one of these....:


A couple of other views:



And, it can double up as a 'bits and pieces' holder if you push the top down inside:


If there's enough interest, I can do a quick tutorial!!?!

 Wink
Report to moderator  THIS ROCKS  
10  TUTORIAL - Alterations to the FREE Buttercup Bag Pattern in Purses, Bags, Wallets: Completed Projects: General by queenofdiy on: March 26, 2009 03:09:19 AM
A few of us Craftsters have made the free Buttercup Bag Pattern from here:  http://madebyrae.blogspot.com/2009/02/free-buttercup-bag-sewing-pattern.html.  I made a bag with quite a few alterations to it, including enlarging the pattern to 125% on the photocopier.  Here's the link to the one I made:  http://www.craftster.org/forum/index.php?topic=296978.0.

The alterations I made were:

  • Firstly - enlarged to 125%
  • Added a mobile phone pocket instead of a flat pocket
  • Added a zipper
  • Lengthened the strap to 24"
  • Interfaced the outer top

A couple of words of advice.  If you choose to interface the lining, the outer top and the handle and you sandwich the strap between the lining and outer - make sure your machine can handle thick layers otherwise you'll be breaking lots of needles!!!

OK.  Firstly, I'll show you how I added the zipper.  You need to start by altering your pattern.  Cut the lining an inch or so down from the top, then add 1/4" seam to either piece, like this:


Then cut your pieces for the bag.  You need to cut extra pieces.  4 pieces, width of the zipper x probably 2 or more inches (for the ends of the zipper) and another 4 pieces, 2 inches x a bit longer than the length of the outer upper piece of the pattern (for the sides of the zipper).  If this is a little confusing now, it may make more sense in the pictures further down.  You need to add the little tab bits to the ends of the zipper like this:


Then you need to add the side bits to the zipper, like this:


Then you need to cut the whole piece to 1 3/4" wide x length of outer upper piece, centering the zipper, like this:


Now you need to sandwich the zipper between the lining bottom and top, like so:


Repeat for the other side.  This is what it should look like:


Then sew the lining together.  With the ends of the zipper, make sure they go 'upwards' when catching in the lining, like this:


Make sure you leave an opening in the lining to turn right sides out:


OK. This ends the tutorial on the zipper.  If it seems a little confusing, I've used a couple of tutorials.  One of my own:  http://www.craftster.org/forum/index.php?topic=85354.msg805095#msg805095 and another:  http://www.themikkelsens.net/sarah/journal/2008/06/recessed-zipper-how-to.html

Now onto how I did the mobile phone pocket.  I cut two squares of fabric (outer and lining) 5 x 5 inch square with 1" squares cut from the bottom of each fabric, like this:


Put right sides together and sew across the top:


Sew the corners of lining and outer:


Put right sides together.  Sew around edge leaving gap for turning:


Turn right sides out.  Press and top stitch along top edge:


Pin to lining:


Sew to lining:


Finally, the pleats.  I followed the directions of the pleats but somehow, I could not get them to fit.  This is how I ended up doing them. I must say, that I do like this way:

I placed a pin in the middle of the fabric.  I pinned the other 4 pleats according to the pattern.  This is what it looked like:


Start by sewing the pleated edges with the outer top piece on the top towards the centre but stopping before the centre, like this:


Start and the other end and stop before the centre.  Create a box pleat and continue to meet the other line of stitching:


You should end up with something that looks like this:


Hope this is helpful.  As always, if you have any questions, fire away!!!  Grin
Report to moderator  THIS ROCKS  
Pages: [1] 2 3 ... 11


only results with images
include swap threads
advanced search



your ad could be here!

How-To Videos
How to Read Art - Turkish Sentinel by Charles Bargue
How to Paint Reflectivity
How to Oil Paint with Hall Groat
How to Oil Paint
Ambient Art - Van Gogh
Latest Blog Articles
Tute Tuesday: Art Pen Case
Sock It To Me!
Meatless Monday: Kale and Edamame Salad

Comparison Shopping




Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...
Moderators

Follow Craftster...






Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2014, Craftster.org an Internet Brands company.