A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Cookie Policy | Terms | Site Map
Welcome, Guest.
Please login or register.
October 5th News Announcement:  New Featured Projects posted!  Congratulate these artists for being selected!
Total Members: 308,399
Currently Running With Scissors:
475 Guests and 18 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop
  Show Images
Pages: [1] 2
1  Bobbles and Cables in Knitting: Completed Projects by smooshyknit on: June 20, 2007 06:22:18 AM
I haven't posted in knitting in, well, a very long time, so consider this a first post! 

This sweater is nearly complete, only missing the toggles and buttons!  It's knit in a size 12months.

Thanks for looking!  (This is my first complete sweater, so I'm very proud!
Report to moderator  THIS ROCKS  
2  Another set of Stitch Markers in Beads: Completed Projects by smooshyknit on: June 18, 2007 08:10:34 AM
Here is another set of stitch markers.  I hope that it is okay to post them here.  They can be considered jewelry--for your needles.  (Right?)

Anyhow, here is the pics!  They're made of glass beads, and aqua colored shell beads.  Tell me what you think!

Thanks for looking!
Report to moderator  THIS ROCKS  
3  Earrings--(update pics) in Beads: Completed Projects by smooshyknit on: June 18, 2007 08:06:20 AM
Here are some new earrings I made this weekend.  The first set is made of mesh wrapped pearl and moon glass.  The second set is made of shell (the large flat disks) and glass (the little red beads.) I added better pictures of the first pair of earrings.

What do you think? 
Report to moderator  THIS ROCKS  
4  Various Stitch Markers (img heavy) in Beads: Completed Projects by smooshyknit on: June 16, 2007 06:03:34 AM
Here are some stitch markers I made with glass beads and split rings.  Feedback is very much appreciated!

For more photos, you can visit my flickr site http://www.flickr.com/photos/27019086@N00/
Report to moderator  THIS ROCKS  
5  "Clementine" Earrings in Beads: Completed Projects by smooshyknit on: June 16, 2007 05:48:27 AM
Hi!  My name is Christina!  I'm not new, but I haven't posted in a long time. 

Now that I got the introductions out of the way, here is a pair of earrings I made.  The beads are glass, and they are mounted on sterling silver hooks.  Honest feedback appreciated!!
Report to moderator  THIS ROCKS  
6  Knitted Hat with Flaps in Knitting: Completed Projects by smooshyknit on: December 27, 2005 08:26:38 AM
I knitted this hat from a pattern I found in Joelle Hoverson's book, "Last Minute Knitted Gifts."  (An awesome book, may I say.)

I used 100% wool in army green and an eggplant color.  
Report to moderator  THIS ROCKS  
7  Kimono inspired Needle roll **Now with Tutorial** in Purses, Bags, Wallets: Completed Projects: General by smooshyknit on: December 27, 2005 08:17:30 AM
I made this baby for a friend, for Christmas.  I chose the patterns and designed it to look kimono like.  (The center strip is supposed to look like an obi.) 

Below is a picture of some stitch markers I made, and a removable strap to hold them.  I used snaps to secure it to the needle roll, and it is tucked in a pocket when not needed. 

1.) Starting with paper, make a template for the pieces of the needle roll.  Use some sort of paper first, that way you dont make mistakes on your fabric.

2.) Pin templates to fabric as follows:  Exterior body and interior flap are fabric A.  Interior body and exterior flap are fabric B.  Main interior pocket will be fabric C, and Bottom pocket and outer Obi (the strip of fabric that wraps around the exterior to look like a kimono sash) are fabric D.  I used four different fabrics, but it isnt necessary.  (Do what looks good!)  Cut out all fabric.  Also, you want to cut two strips of ribbon for the outside of the wrap, and two for the inside, plus one more to serve as the tie.  All the pieces, except for the last one, will be cut to fit the width of the needle roll.  (I used 21)  Cut the ribbon that will serve as the tie longer than the width of the roll.  When it is folded in half, it should be long enough to wrap around the finished rolled and tie into a bow.

3.)  Starting with the main pocket (the diagonal cut one):  Fold a seam on the diagonal, and iron it down to make sewing easier.  Pin ribbon to the diagonal.  Using a thread that matches the ribbon color, stitch the ribbon in place.
4.)  Next, take the rectangle that will serve as the bottom pocket, and repeat the above step with another ribbon.
5.)  Take diagonal cut fabric and pin to interior panel, ribbon side facing up.  Using a water soluble pencil and a ruler, make marks on the top and bottom of the diagonal fabric at 1.5 intervals, keeping in mind seam allowances.  After marking top and bottom, use a ruler to connect each line.  Using the chalk marks as a guide, sew along each line.  (This makes the long thin needle pockets.)   

6.)  Pin what will be the bottom pocket to the bottom of the diagonal pocket.  Using the diagonal pocket as a reference, draw a line every three or so spaces.  Sew along the drawn lines.  IMPORTANT:  make sure when you sew your lines you are on top of a previously sewn line, otherwise you are going to sew through your previously made needle pockets.

7.)  Take the fabric panel that will be the Obi.  Fold the seams and iron them, making the obi as wide as you want.
   Find the center of the exterior body panel and position the obi over it.  Take the two ribbons designated for the outside of the roll, and pin them, and the obi, to the fabric panel.  The ribbons should be pinned along the top and bottom edge of the obi, so that it slightly hides the seam.  Sew through each ribbon, fastening the obi to the panel.  

8.)  Assemble the needle roll.  Place both exterior and interior panels together, wrong sides facing out.  Take the ribbon that will serve as the tie, fold it in half, and position it in the center of one side of the roll.  Pin it so that the ribbon is sandwiched inside the panels, leaving only a little loop made by the fold sticking out of the side.  

9.)  Starting near a corner sew all the way around the edge of the two panels, as if sewing a pillow case.  Leave a few inches open, for turning.  Trim excess fabric and clip the ends of the corners.
10)  Turn work right side out.  Using a pencil (or a knitting needle) push all the corners out and to a point.   Using a hot iron, carefully iron entire roll to create crisp edges.  Fold in the fabric around the open hole and starting there, sew around the roll one more time, to give the edges more definition.

11.)  The flap is saved for last because it is smarter to adjust the size of the flap to match the roll, rather than the other way around.  (During the sewing process, youre rolls dimensions will change!)  Sew the flap, wrong sides out, just like a pillow case, leaving one of the short sides completely open.  Trim the excess and turn the fabric out.  Iron it flat, and using the needle roll as a reference, fold the seams inward until it is the same width as the roll.  Starting with the folded opening, Sew a seam around the outer edge of the flap.  
12.)  Pin the flap to the top interior of the body.  The lining fabric should face down, and the fabric that matches the exterior should be facing up.  Sew along the top edge.  

The stitch marker strap is really easy to put in.  You can use ribbon, or like I used, the elastic straps used for bras and camisoles.  (I bought a scrap bag that had a ton of that stuff.)  Use snaps to attach it to the diagonal pocket and more snaps to make the loop that will hold the markers.  You dont need any special equipment for the snaps I used, but there is a holder that makes the job a whole lot easier!  (Pictured.)  Make sure your strap is long enough to fit into one of the bottom pockets.  

Also, depending on the fabric you use, you might want to add interfacing.  I didnt, and my needle roll, made mostly of stretch fabric, is a little too floppy.  

Voila!  Done!

Report to moderator  THIS ROCKS  
8  Re: Anthropologie-inspired capelet- By julsey723 in Knitalongs by smooshyknit on: November 17, 2005 08:51:42 AM
I saw this pattern last week and decided to take a crack at it.  This is my first knitted garment.  (Everything else has been accessories and toys.)  I'm pleased with the outcome, although it is a tiny bit snug. 

The second picture isn't great, but it gives you an idea of how it fits:

Since I haven't knitted clothing before, I had no idea on how to make it my size, so I just used bigger needles.  It gives it a looser knit, which was fine considering the fluffy yarn I used.  Now that I know how the pattern works, I guess next time I can just add stitches until it matches my measurements.
Report to moderator  THIS ROCKS  
9  Knitting Needle Holder in Knitting: Completed Projects by smooshyknit on: November 15, 2005 08:34:43 AM
Here are two picks of the first knitting needle holder I made.  I'm currently working on another, which I will post later.

Yeah, I made some mistakes, but I had fun doing it.  (And that's the only thing that matters!)
Report to moderator  THIS ROCKS  
10  Robot Girl in More Art, Less Craft: Completed Works by smooshyknit on: November 15, 2005 08:20:26 AM
Okay, it isn't a very imaginative title, but that is what she is!  This is just an ink drawing on plain white paper.  I welcome feedback! 
Report to moderator  THIS ROCKS  
Pages: [1] 2

only results with images
include swap threads
advanced search

Latest Blog Articles
@Home This Weekend: Mermaid Tail Blanket
October 19, 2016 Featured Projects
Tute Tuesday: Vanilla Extract

Comparison Shopping

Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...

Follow Craftster...

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2016, Craftster.org an Internet Brands company.