A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Please remember to SEARCH before asking a question that may have already been answered. Thanks!
Total Members: 296,704
Currently Running With Scissors:
654 Guests and 38 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop

  Show Topics
Pages: [1]
1  JEWELRY AND TRINKETS / Trinkets and Jewelry: Completed Projects: General / Shrinky-Dink Handpainted Portrait Bracelet on: June 24, 2006 10:38:22 PM


My project was based on one from the DIY Network show 'Jewelry Making':http://www.diynetwork.com/diy/cr_jewelry/article/0,2025,DIY_13762_3256868,00.html.
This was a gift for my mom for mother's day... it is shrinky dink portraits of her five kids and two grandkids.  I roughly traced the pictures with Sharpie marker and painted the shrinky dink with very watered-down acrylic craft paint, then added holes and shrank them (see the before and after pictures below)... I made it into a bracelet with magnetic clasps.
2  CLOTHING / Clothing for Kids: Completed Projects / Child's Superhero Cape on: June 24, 2006 10:10:05 PM


My 5-year-old nephew is VERY into superheroes, so I made him a cape so he could be his own kind of superhero.  But I couldn’t find a pattern anywhere (not even in Halloween costume pattern books), so I made one up.  I’m putting my pattern on this site in case it might help somebody else.  It’s a superman-type cape (see the pictures), with Velcro at the collar so if it catches on anything it will easily break free.

My nephew’s measurements:
neck 10-1/2” around
22” from the base of his neck to the back of his knees
shoulders 12” wide

I wanted it to be sturdy and washable, so I chose sturdy red cotton cloth (broadcloth, I think) and used the same material for the lining of the cape, and regular cotton fabric for the icon on the back of the cape.  I used a ½” seam allowance for sewing the cape.

I wanted the cape to end up being 15” wide at the shoulders and 22” long from the back of the neck to the bottom, so I chalked a rectangle 16” wide (with seam allowances) and 22.5 inches long (with bottom seam allowance).  I added 7.5” to each side on the bottom of the cape (in order to end up with 30” base plus two seam allowances), and drew a straight line up to form a triangle with the 16” top.  This gave me a trapezoid!

Now comes the geometry part: a circle (neck) with a 10.5” circumference is about 3.5” in diameter (1.7” in radius), so I added material to the top to run forward over his shoulders to the front of his neck (3.5” plus 0.5” seam allowance = 4”).  I added this as a 4”x16” rectangle at the top of the trapezoid and rounded off the corners (by eye).  Finally, I drew a circle that touched the very top and was 3” in diameter.  I will describe later how I cut ½” radiating slices around the neck circle before attaching the collar, and this produces a 4” diameter neck.

So, I cut this cape shape out of the cape material, and then used fusible web according to directions to attach a yellow-gold letter C to a square of black cotton (and zigzag-stitched around it in matching thread), then used fusible web to attach the square to one of the layers of red cape (and zigzag-stitched around it in matching black).  This gave me my ‘C’ icon.

I laid the two identical cape pieces with right sides together and stitched around, stopping at the neck hole.  Turn the cape right-side out and iron the edges, then sew around the cape (1/2” from the edge) so the layers will stay together correctly.  I then cut ½” radiating slices around the neck circle.  I used stiff fusible webbing (slightly smaller than the collar) to line the collar, then folded it in half (lengthwise, fusible out, and sewed the short ends closed.  I turned the collar right-side out and turned in (and ironed) the ½” at the bottom of the collar to hide the ends.  I then pinned the collar so that the cut neck tabs were inserted into the inside of the collar, and sewed it.  The collar is extra long (to allow the child to grow) so it will extend a couple of inches beyond the edge of the cape (at the start of the neck hole) - but sew the bottom of those parts of the collar shut.  Sew Velcro onto the neck, making sure to put the prickly part on the part that faces away from the neck, and the soft part on the side of the collar that will be farthest from his skin.



That’s it!  By the way, I also got a simple ring kit from the craft store and made him superhero rings with a replica of the ‘C’ icon (I gave him one and his mother several extra in case he breaks or loses them).
Pages: [1]


only results with images
include swap threads
advanced search



your ad could be here!

How-To Videos
Get Excited for Cannes Film Festival Fashion
Diane Kruger Shows Major Midriff and More from the Prabal Gurung Dinner
Styling Tips For Great Gatsby Hair Accessories
Trend Alert: Cut Outs
Get Inspired by Nature for Your Summer Wardrobe
Latest Blog Articles
Sock It To Me!
Meatless Monday: Kale and Edamame Salad
@Home This Weekend: Teacup Bird Feeder

Comparison Shopping




Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...
Moderators

Follow Craftster...






Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2014, Craftster.org an Internet Brands company.