A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Please remember to SEARCH before asking a question that may have already been answered. Thanks!
Total Members: 302,560
Currently Running With Scissors:
728 Guests and 25 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop

  Show Images
Pages: [1]
1  Sewing lycra (or similar) with fused embellishments?! in Sewing in General: Discussion and Questions by lucidflower on: November 11, 2008 05:52:10 PM
Okay, so I have this lycra-like fabric, a four-way stretch with some kind of small clear plastic embellishments glued or fused to the fabric, that make it somewhat sparkly. I've sewn other knits successfully before, but the embellishments seem to be gumming up my needle, and I drop stitches like mad if I can manage to make a seam at all. Has anyone worked specifically with a fabric like this? I am using a ball point needle, I might have a knit needle I can try instead. My machine is a cheapo Brother with several presets but not many options for adjusting bobbin tension (or any, that I can tell).

Any ideas?

eta again: stretch needle plus low tension did the trick eventually, but not until i hit on just the right combination at the end of the project. figures.

ETA picture of something similar to what I am trying to describe:
Report to moderator  THIS ROCKS  
2  starch+fabric wall decal, plus painted light switchplate (dino-deer showdown!) in Interior Decorating: Completed Projects by lucidflower on: November 10, 2008 09:42:45 PM
Hi all, first post (now I have 10, actually so I'm editing to put the pics in place of the links). Sorry for the low photo quality--nighttime pictures with a webcam, boo!
Like many folks who rent, I am stuck with white boring walls that can't be painted per my lease. After looking at a bunch of craftster threads, I was reminded of the technique of applying fabric to painted walls using laundry starch, and decided to give it a go.



I wasn't really sure about that fabric when I started, and up on the wall with that awful light switch, I was afraid I'd wasted a lot of time. So I decided to paint the light switch cover with acrylics. (I was talking to a friend on the phone who gave some creative input on subject matter: "Paint a dinosaur shooting laser beams!")


Then up on the wall it went--now they are having a showdown! I like them both a lot now. Funny what those little details can do.



The dino light switchplate I just did with acrylics--later I will spray it with some sealant to prevent chipping. Since switchplates are so easily replaceable, I am not worried about my lease.

For the deer, I didn't take pictures of the process but it's pretty simple.

First, I found an image I liked online and traced it straight from my computer screen to tracing paper.
Next, I traced that onto some graph paper. I touched up the graph paper version where my tracing was inaccurate. I did a bunch of stuff where I measured the dimensions of the graph-paper deer and the wall where I wanted to paste it, figured out aspect ratios and everything, but then I realized I could just convert my 1/4" squares to 2" squares and that would be a good size for my wall. The final dimensions on the wall are something like 36x56 inches.
Then I cut two large pieces of kraft paper and taped them together so they would be big enough for the full size deer. Using my quilting ruler, I made a graph of 2" squares on the kraft paper and used my smaller picture as a guide for drawing the larger one. Then I cut out the kraft paper deer and ironed it on a low setting to keep it from rolling back into a tube. I taped it on the wall to see how I liked it.
It looked good, so I marked a few spots for later reference when hanging the fabric, so it would be even. I then pre-starched my fabric (a slippery something--maybe acetate?--it was a curb find!) with spray starch and an iron. I felt like a 50s housewife, haha. The spray starch made the fabric MUCH more manageable, and I think it slightly diminished fraying as well. I used the cheapest brand of spray starch in the store. And I pretty much always recommend ironing any fabric before use (if it *can* be ironed, of course); I couldn't believe the difference in my sewing years ago when I just started ironing more often.
Next I laid the fabric on the floor and tried to decide if I wanted to pin it or weight it. (Oh that reminds me: measure twice, cut once!! I thought I had enough fabric but the deer's antlers got a little chopped off in one area. oops.) I don't have sewing weights and I don't eat canned goods, and I was feeling too lazy to pin at this point (drawing the graph took a long time!). So I decided to just wing it, going slowly and carefully. I used a uni-ball pen to trace because a sharpie would have left marks on my hardwood floor.
Now here is where I diverted from plan a bit. I intended to go over the outline with some fray-check to keep the threads from unraveling. If I'd been able to use a sharpie, that would have been nice too, for the visibility. However, it worked without either one of those things so while they might have helped the process, it's not a big deal.
Finally, it was time to put it up! I used some low-tack masking tape to hold the deer in place in just a few spots along the top edge (the deer's back). Then I went to town with some "Sta-Flo" liquid starch, undiluted, and a foam brush. (I put a towel down underneath in case of drips.) I used a gentle touch while saturating the fabric, and allowed the fabric to tell me where to go, since I was worried about it stretching out of place and coming out crooked. On the edges, I tried to follow parallel to the cut, to minimize pulling any threads lose. Once most of it was up, I took off the tape and finished covering all areas. That's it, really!

A couple last thoughts: Since the fabric is a synthetic, I don't think there is any risk of bleeding onto the wall since the color is bonded to the fiber differently than in cottons or other natural fibers. If I'd used cotton, I would have prewashed in warm water just to be safe.
Also, the pen marks on the edges DO bleed a little bit; I noticed this as I glued it up. I am hoping they will wash off with soap and water or a little rubbing alcohol when it's time to take it down, but if you are worried, you can just cut inside the lines of your pattern, or use chalk or something else washable.

Thanks for checking out my project! It's the first crafty thing I've done in ages and it felt so good to be making things again.
Report to moderator  THIS ROCKS  
Pages: [1]


only results with images
include swap threads
advanced search



your ad could be here!

How-To Videos
Roasting and Presenting the Paratha
How to Make Parathas
Preparing Dough for Parathas
Rolling Out the Parathas
Adding the Chicken to the Masala
Latest Blog Articles
Spotlight on: Book Making & Binding
@Home This Weekend: Magical Fairy Garden
DIY Summer

Comparison Shopping




Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...
Moderators

Follow Craftster...






Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2014, Craftster.org an Internet Brands company.