A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: Craftster is for freely sharing how to make things! Don't post pics of things you sell in hopes of getting some sales or we'll have to bust out the LIMBO stick on you! Wink
Total Members: 297,522
Currently Running With Scissors:
623 Guests and 24 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop

  Show Posts
Pages: [1]
1  FIBER ARTS / Felting: Discussion and Questions / Re: protecting felt from water and other elements on: July 08, 2014 07:24:04 AM
Hi,

I would say no and (as you predicted) I would say make it in polymer clay, papier mache or ceramics.

You could try making a test piece and see what might happen if you try to seal it. If you manage to seal it to your satisfaction, you would need to wait a few months or more to see what happens to it over time.

Wool will absorb a lot of moisture so if you are using a water based sealer it is possible that is will cause the fibers to swell and distort. Cloth is relatively thin so coating it with paint etc. doesn't significantly alter the drying time, but with a 3D fiber sculpture you could end up with the surface drying while the interior is still quite wet. If the surface dried completely it may become even harder for the interior to dry which may cause other problems. You may not ever be able to make the interior stiff/hard which then increases the chance that the outer layer (if it does harden) cracking.

Fiber isn't typically treated in this manner. If you want it so hard that you could put enough primer on it to be able to sand it - you've eliminated any reason for it to be made of fiber in the first place.

Good Luck with your project!


thanks for the answer..........about the painted cloth heres the example of what I am taking about if you have time to watch
probably around 4 and 8 minute mark you can see the painted cloth to stiffen it.......

http://www.youtube.com/watch?v=J9GKEq-N810

for the felted 3d object it is hollow I felted it with a foil inside it to make it hollow after felting, I remove the foil.....theres enough opening for me to paint inside and outside to make it hard and stiff............the first layer of paint or glue or acrylic  is to make it hard so that it can hold the fabric then I will apply some primer which can be sand then thats where the base coat will come one of my goal is to prevent the wool from moist and absorbing water....I plan to use  alcohol or non water solvent (alcohol,thinner,reducer,glue and acrylic any one of this type)  for the paint to make it hard.

by the way thanks for the response it seems nobody have done this I tried to search the net about it and failed to find any answer..........hope anybody can join in and take their opinion about it or if ever  they have already done it...they can share the experience with this kind of approach.......

thanks
2  FIBER ARTS / Felting: Discussion and Questions / protecting felt from water and other elements on: July 07, 2014 12:42:47 PM
Hi there I am new here........I have a question?........I finish felting  a 3d figure and I don't want to retain its cloth type because dirt, moist and other elements I want to protect it and I want to make it hard or stiff........we all know that if you paint cloth with paint, glue or acrylic the cloth will turn stiff.....so my question is what are the best to make this happens and to achieve my goal.......

and by the way my felted 3d object has only 1 color because after I achieve my goal to stiffen or make it hard (the first question) I will apply some primer stuff to make it smooth and will sand it then paint it (like I said I don't want to retain the cloth soft properties)................does this applicable or there are other ways to make it happen.


if you look at what I am trying to do is like what ceramics or polymer figure out there ( I know you will say just make it with polymer clay or use clay if you want some figurine stuff..........I just wanna know if my plan is applicable to felted 3d objects.....

thanks in advance
Pages: [1]


FacebookTwitterPinterest
only results with images
include swap threads
advanced search



your ad could be here!

How-To Videos
How to Set the ISO Function Using the Panasonic G1/GH1
How to Format the Memory Card Using the Panasonic G1/GH1
How to Set the Flash Using the Panasonic G1/GH1
How to Set the Exposure Compensation Function Using the Panasonic G1/GH1
How to delete Pictures Using the Panasonic G1/GH1
Latest Blog Articles
@Home This Weekend: Seed Packet Gifts
Cooking: Honey Month
September 19th - Talk Like a Pirate Day!

Comparison Shopping




Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...
Moderators

Follow Craftster...






Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2014, Craftster.org an Internet Brands company.