I don't know if this will help anyone but here is a trick I did with some of my small hooks that made it a little easier for me to use them. I first wrote the size and brand name down on a small piece of paper then wrapped a short length of masking tape around the flat grip place of the hook. Then I took some old gel pens that the ink was gone, I removed the ink cartridge from inside and slid my hooks inside till the ends were poking out of the narrow end of the pen body I had to adjust the amount of masking tape so that the hook stayed in place. I put the small piece of paper inside so that I could read the size and put the end back on the pen. I also kept the cap so that when I finish working I can protect my small hooks. My favorite small hook now has a green body that says Sassy on the lower part.
Hope this trick will help other crocheters.