A Crafts Community For Craft Ideas & DIY Projects - Craftster.org
Help | About | Contact | Press | Advertise | Terms | Site Map
Welcome, Guest.
Please login or register.
Random Tip: You can get cheap (and legal! Wink) advertising by donating a challenge prize! Go here for more info.
Total Members: 302,582
Currently Running With Scissors:
570 Guests and 12 Users
Home Craftster Community Crafting Articles Craft Tutorials My Craftster Crafting Calendar City Guides Craft Shop

  Show Images
Pages: [1] 2
1  Peso Coin Necklace in Trinkets and Jewelry: Completed Projects: General by Biothief on: September 09, 2013 03:45:19 PM


I remember seeing this coin, the 200 Colombian peso, with a Quimbaya tribal symbol.

Here's what I did: I found a keyring that just a bit larger than the coin.
The coin stays in with tension.
Used a knot tie for the rope yarn (to keep within the theme).

Ta-Da!!!
Report to moderator  THIS ROCKS  
2  Recycle Bras turned into Reconstitued Thongs in Clothing: Completed Projects: Reconstructed by Biothief on: April 26, 2012 04:36:37 PM


So I had these old bras and wanted some new thongs. I used everything except the cups. The shoulder straps make for a great waist adjusters. The black thongs has straps that are interchangeable.

Update: Tutorial http://biothief.deviantart.com/gallery/26949296#/d50zypv
Report to moderator  THIS ROCKS  
3  Blue Versace Mini Top Hat in Completed Projects by Biothief on: February 20, 2012 04:41:07 PM


I saw a Mini Top Hat tutorial by Thread Banger and just had to try it. Mostly hot glue with very little sewing, fabric/bias tape/wiring for the brim/cardboard for the body. The button is a Medusa Head by Versace; I glued some crystals around the buttons.
Report to moderator  THIS ROCKS  
4  Royal Crest Button Pendent necklace in Trinkets and Jewelry: Completed Projects: General by Biothief on: February 20, 2012 03:38:30 PM


I like buttons but the problem is when they hung on a chain, the button would tilt forward and down. By taking, from an old watch, the latch that is inserted into the hole, I placed it into the hoop in the back of the button. It's held by tension so I didn't have to solder but I did put a little glue. Now I have an attachment hoop at the top of the button so it won't flip over.
Report to moderator  THIS ROCKS  
5  Pants to Baby Doll's skirt reconstruct in Clothing: Completed Projects: Reconstructed by Biothief on: April 06, 2011 01:44:15 PM
After seeing the Thread Banger's Baby Doll's Sucker Punch Box Pleat Skirt With Yoke tutorial http://www.youtube.com/user/ThreadBanger#p/a/u/1/MzebksedZAo I decided to give this a go. I saw Sucker Punch and loved the wardrobes of each of the characters. So I had a pair of gray pants that was too small for me and couldn't think of what to do with this. Saw the tutorial and decided why not.

I deconstructed the pants to see how much material I could use


Usually you want to just box pleat (fold & iron) the fabric until you have enough, and then some, to go around you. However, since the scraps I was working with were already cut to a certain length, I had to improvise. From each side of each leg, I cut out 9 9"x9" squares (1 & 1/2 legs back & front) and folded/ironed flat the 2"s on 2 sides of the squares, giving me a folded 4"x9" rectangle. Then, using the rest of the pant leg, I cut 9 4"x9" rectangles. So with the cut 4"x9" rectangles laying between and underneath each folded 4"x9" rectangle, I stitched all the ends together. I hemmed one side, to be the bottom, and ran a straight stitch on top to hold the pleats together. The rest of the pants I used for the yoke. I didn't use any zippers or actual closure but that's my choice. Below is the result:

Report to moderator  THIS ROCKS  
6  Photo Studio Backdrop in Completed Projects by Biothief on: January 18, 2011 02:54:38 PM


Since I do sew a lot, I thought it would be cool to try some photography to show off some of my wares. I don't have a lot of money to buy professional photography backdrop etc. So what I did was I piece together some velcro to some home decor hooks (the adhesives on the hooks can be a bit damaging to the walls) and measured both about 8 ft high on the wall. I then took two bathroom curtains and taped them end to end, giving me about 70"W x 140"L (5'10"W x 11'8"L) to work with. Using some duct tape, create a sleeve at one end to slide a curtain rod. Hang on wall hooks and there ya go...instant photo backdrop.

Update: poster shout4joy made a wonderful suggestion of using Command hooks in place of velcro. That totally slipped my mind and would be a great substitute. Thank you.
Report to moderator  THIS ROCKS  
7  Laundry bag turned into cargo pants in Clothing: Completed Projects: Reconstructed by Biothief on: January 18, 2011 02:01:06 PM


I found that some $1.50 laundry bags (unused or washed) can be a great source of fabric. I stand at 5'5" and this just about my pant length. The zippers are from another upcycle but I took my other cargo pants, fold them in half length wise and use that as my pattern. For me, the difficult part was the zipper flap and instead of using a button at the waist, I used a piece of velcro.

Oh, I also stenciled the gray strips onto the turtle neck sleeves. I love the end look.
Report to moderator  THIS ROCKS  
8  Winter/Snow/Ushanka hat in Clothing: Completed Projects: General by Biothief on: November 18, 2010 08:26:48 PM
I always wanted a Ushanka hat. I had some fur in my inventory and decided to use them. The white-ish fur is imitation yack fur (in NYC fabric destrict, only one store sells it and it cost me $40/yd) and the other fur is some sort of nice thick black fake fur. Both soft and of great quality.

Unfortunately I pulled this together during the NYC heatwave during July.




Pattern Download: http://th09.deviantart.net/fs70/PRE/i/2010/209/e/8/Ushanka_Pattern_by_Biothief.jpg

It's basically done in 2 pieces, the outter shell (the black fur) and the inner lining (imitation yack fur). After measuring out the fur (about the size of my head), I placed the layers together (right sides facing each other), fold & pinned, placed the pattern on top and cut.

When working with fur, keep in mind two things
1: Wear protective googles cause the little pieces of fur will get into unprotective eyes
2: While sewing (easier to start along the ear flaps), pinch the edges so that the grain of the fur lays sideways and flat, to lessen the bulk on the seam.

I left the top unsewn to fit the depth. After I flipped the piece right side out, I placed the hat on my head, sized the depth and pinned a separate round piece(measured to the circumference of my head), then sewn closed. Also did the latter for the outter shell but hand sewn.

I think I made the flaps too long, though.

Can't wait for it to really snow and freeze. Enjoy!!!
Report to moderator  THIS ROCKS  
9  Halo ODST messenger bag in Purses, Bags, Wallets: Completed Projects: Reconstructed by Biothief on: November 06, 2010 01:12:21 PM


I had to make this. I'm a big Red vs Blue fan; hell, Halo in general (although I don't get to play very often). Anyways, I constructed this out of a $15 pair of size 9 jeans, mesh is left overs from my upcycled inFamous jacket (get that up here soon) and a $.99 thermal shirt for the inside. I wanted "water-proofed" so I lined the inner "inside" of the 2 bag pockets with duct tape. Then some stenciling; I can't say enough for contact paper for stencilling.

I'm very particular with seams; I try and hide them. So trying to sew up the inner bag (2 zippers, 2 pockets to hold books, laptop, etc.) and the sides proved a bit difficult with this first trial run.

I was lucky to fine the zippers from an old CD storage case I nearly chucked into the garbage. In keeping with down-sizing while upcycling, dismantled the CD case and saved the parts for supplies.

Update:
I have recently been commissioned to make 2 of these bags. I have been able to make 2 of these messenger bags out of a one yard of fabric (outer shell, $3 yd), one laundry bag (enough to divide the inside into 2 pockets per bag, $1.50), the strap adjuster and buckles ($10). Total: $14.50 for 2 bags.
Report to moderator  THIS ROCKS  
10  Rubi Malone (WET video game) Monkey Business shirt in Stenciling: Completed Projects by Biothief on: October 04, 2010 02:25:54 PM
I've been trying to make this shirt for a while.




Click link for a closer look http://fc02.deviantart.net/fs71/i/2011/041/0/f/rubi_malone_shirt_by_biothief-d302yh7.jpg

I made several attempts but the lines were never this clean. What I did was that I made several (layer) stencils from contact paper (bought in a hardware store; the kitchen section). I'm amazed at some of the details, both thin and small (the monkey on the pistol handle measured only 3/4 of an inch), one can cut out (with an Xacto knife, of course). I cut out each layer while the first film of paint dried.

On the inside of the shirt, I placed lines of duct tape because, in my previous attempts, the paint brush would pull some of the shirt thru the stencil and the paint would bleed to the side. This will allow the fabric to be somewhat stiff and protect the rest of the shirt. I find that less paint bleeds thru the shirt using this method.

I also figured my problem was how I painted; instead of brushing side to side, I kindof did little up and down jabs (perpendicular to the shirt surface).

The paint required 2 coats; it'll crack in places which is what u want. After the paint dried, I placed a sheet of paper (the contact paper backing that it sticks to) ontop of the shirt and ironed it for at least a min.; when curing paint (so it doesn't wash out), always place a wax sheet btw the shirt and iron so it doesn't burn the paint.

Lol, I also can't seem to get this monkey off my back (joke)!
Report to moderator  THIS ROCKS  
Pages: [1] 2


only results with images
include swap threads
advanced search



your ad could be here!

How-To Videos
Kooey 2013 At Mercedes Benz Fashion Week Swim, Miami Beach
Nicolita 2013 At Mercedes Benz Fashion Week Swim, Miami Beach
Poko Pano 2013 At Mercedes Benz Fashion Week Swim, Miami Beach
Vitamin A 2013 Collection At Mercedes Benz Fashion Week Swim, Miami Beach
Agua Bendita 2013 At Mercedes Benz Fashion Week Swim, Miami Beach
Latest Blog Articles
Spotlight on: Book Making & Binding
@Home This Weekend: Magical Fairy Garden
DIY Summer

Comparison Shopping




Support Craftster
Become a
Friend of Craftster

Buy Craftster Swag
Buy Craft Supplies
Comparison Shopping

Craftster heartily thanks the following peeps...
Moderators

Follow Craftster...






Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC
SimplePortal 2.3.5 © 2008-2012, SimplePortal
Valid XHTML 1.0! Valid CSS!

Copyright ©2003-2014, Craftster.org an Internet Brands company.