| Crown Audio XLS 1000 Power Amplifier |
 | General Features:Xls High Performance, Lightweight Class D AmplifierRms Power Rating: 8 Ohms: 215 Watts X 2 Chan.4 Ohms: 350 Watts X 2 Chan.2 Ohm: 550 Watts X 2 Chan.Bridged, 8 Ohms: 700 Watts X 1 Chan.Bridged, 4 Ohms: 1100 Watts X 1 Chan.Integrated Pureband Crossover System For Better Performance And ControlPeakx Limiters Provide Maximum Output While Protecting Your SpeakersXlr, 1/4in, Rca Inputs Provide Outstanding FlexibilityEfficient Forced-air Fans Prevent Excessive Thermal BuildupElectronically Balanced Xlr Inputs; Touchproof Binding Post And Speakon® OutputsPrecision Detented Level Controls, Power Switch, Power Led, And Six Leds Which Indicate Signal, Clip And Fault For Each Channel1-year Manufacturer's Warrantyspecifications:Sensitivity (for Full Rated Power At 4 Ohms): 1.4 VrmsFrequency Response (at 1 Watt, 20 Hz - 20 Khz): +0 Db, 1 DbSignal-to-noise Ratio Rated As Dbr To Full Rated 8 Power Output (a-weighted):Xls1000: , 97 Db Xls1500, Xls2000, Xls2500: , 103 Db Damping Factor (8 Ohm) - 10 Hz To 400 Hz: , 200Crosstalk (below Rated 8 Power):At 1khz: , 85db At 20khz: ,55db Input Impedance (nominal): 20 K Balanced, 10 K UnbalancedLoad Impedance:2 To 8 Per Channel In Stereo 4 To 8 In Bridge Mono Ac Line Voltage And Frequency Configuration: 120 Vac 60 HzVentilation: Flow-through Ventilation From Front To BackCooling: Internal Heat Sinks With Forced-air Cooling For Rapid, Uniform Heat DissipationAir Volume Requirements (per Minute Per Unit): 80.15 Ft? (2.27 M?)Integrated Processing:Pureband Crossover System Crossover Filter: Linkwitz-riley 24db Per Octave Crossover Frequency Range: 50 Hz - 3 Khz Crossover Mode: Crossover (ch1=lpf, Ch2=hpf), Lowpass (both Channels Lpf), Highpass (both Channels Hpf), Bridge (lpf Or Hpf) Peakx Limiters: Channel Independent Clip Limiter Designed To Provide Maximum Output While Protecting Your Loudspeakers Input/output:Input Connectors: Xlr (one Per Channel), 1/4-inch (one Per Channel), And Rca (one Per Channel). 1/4-inch Connectors Can Be Used As Loop-thrus To Distribute Signal To Additional Amplifiers Output Connectors: Two 4-pole Speakon® Output Connectors Accept 2-pole Or 4-pole Speakon® Connectors. The Top Speakon Connector Is Wired For Both Channels So It Can Be Used For Bridgemono Wiring Or For Stereo Wiring Of Two Speakers To A Single Speakon Connector One Pair Of Back-panel Binding Posts Per Channel; Accepts Banana Plugs Or Bare Wire. (european Models Do Not Accept Banana Plugs.) Construction:Xls1000/xls1500: 8.12-inch (20.62cm) Depth Xls2000/xls2500: 10.35-inch (26.29cm) Depth Dimensions:Eia Standard 19-inch (48.3-cm) Rack Mount Width(eia Rs-310-b), 3.5-inch (8.9-cm) Height. Xls 1000/1500: 7.7-inch (19.6-cm) Depth. Xls 2000/2500: 10.7-inch (27.2-cm) Depth. Net Weight, Shipping Weight:Xls1000: 8.6 Lb (3.9kg), 13.6 Lb (6.2 Kg) Xls1500: 8.6 Lb (3.9kg), 13.6 Lb (6.2 Kg) Xls2000: 10.75 Lb (4.9kg), 15.8 Lb (7.1 Kg) Xls2500: 10.75 Lb (4.9kg), 15.8 Lb (7.1 Kg) |
| Seller | Price (USD) | Seller Rating | Quality | Availability | |
 | $299.00 | 4.86 | New | yes | Shop Now »» |
Shipping costs are based on an estimate of UPS ground or equivalent carrier within the contiguous US, excluding Alaska and Hawaii. Please see Seller's website for actual shipping costs.
If you notice inconsistencies in this product information, we encourage you to notify PriceGrabber.com of any issues by clicking here.
See Crown Audio XLS 1000 Power Amplifier on PriceGrabber.com. |
|
